Bosch MFW 2500W - Инструкция по эксплуатации - Страница 23

 23

en

Before using for the first time

Before using for the first time

Before the new appliance can be used, 

it must be fully unpacked, cleaned and 

checked.

Caution!

Never operate a damaged appliance!

■

Remove the base unit and all 

accessories from the packaging.

■

Remove the packaging material that is 

present.

■

Dismantle any assembled parts into 

their individual parts. Do this in reverse 

order, as described under „Preparation“.

■

Check all parts for completeness. 

X

Fig. 

A

■

Inspect all parts for visible damage.

■

Thoroughly clean and dry all parts 

before using for the first time.  

X

 “Care and daily cleaning” see 

page 26

Control and display 

elements

Button 

k

Press button 

k

 to switch on the appliance.  

The drive will start up at once. Press button 

k

 again to switch off the appliance. The 

drive stops.

Release button

Press the release button to unlock an 

attachment fitted on the appliance. Only 

when the release button is pressed is it 

possible to turn the attachment clockwise 

and remove it from the base unit.

Safety devices

Thermal circuit breaker

If the motor switches itself off while the 

appliance is being used, the overload 

protection feature has been activated. 

Possible causes may be the simultaneous 

processing of large quantities of food or a 

blockage caused by bones.

X

 “Troubleshooting” see page 30

Overload protection

To prevent serious damage to your 

appliance if the base attachment is 

overloaded, the agitator paddle has a 

notch (predetermined breaking point). If 

overloading occurs, the agitator paddle 

will break at this point. A new agitator 

paddle is available from Customer 

Service (No. 10011109). Spare parts with 

a predetermined breaking point are not 

covered by our warranty obligations.

Replace agitator paddle

X

Fig. 

E

1. 

Release the screw in the agitator paddle 

with a screwdriver (PH2) and remove 

the faulty paddle.

2. 

Fit a new agitator paddle and screw tight 

again.

Base unit

Preparation

W

Risk of injury!

Do not insert the mains plug until all 

preparations for working with the appliance 

are complete and the required attachments 

are assembled correctly and connected to 

the base unit.

■

Place the base unit on a stable and level 

work surface.

The base unit is now prepared.

Base attachment

The base attachment can be used for the 

following   applications:

Meat mincer

For mincing raw or cooked food. Select the 

appropriate perforated disc depending on 

the type and consistency of the food to be 

processed. 

X

 “Tips” see page 28

Sausage filler

For filling artificial and natural casings with 

sausage meat. For producing meat rolls.

Kebbe maker

For producing tubes of dough or minced meat.