Yamaha MCR-B043 Blue - Инструкция по эксплуатации - Страница 17

15 

En

Englis

h

To listen to the FM station, connect the antenna as described in “Connecting the speakers and antenna” (

☞

 P. 4).



Display information (remote control only)

If you press 

DISPLAY

 on the remote control, the information shown on the front panel display will be switched in the 

following order.

LISTENING TO FM STATIONS

Selecting an FM station

1

Press the 

RADIO

 source button to switch the 

audio source to FM.

2

Tune FM stations

Automatic tuning: Press and hold 

TUNING

/

.

Manual tuning: Press 

TUNING

 /

repeatedly.

If you tune to a station manually while receiving FM, the sound 
will be monaural.

Preset number and frequency 

Reception status*

* Example of reception status indication.

TUNED/STEREO:

A strong FM stereo broadcast is 
being received.

TUNED/MONO:

A monaural FM broadcast is being 

received (even if the FM broadcast is 
stereo, reception will be monaural if 
the signal is weak).

Not TUNED:

No broadcast is being received.

Displaying Radio Data System information

If you press 

DISPLAY

 on the remote control while Radio 

Data System information is being received, the information 

shown on the front panel display will be switched in the 
following order.

- PS (Program Service)
- PTY (Program Type)
- RT  (Radio  Text)
- CT  (Clock  Time)
- Reception status
- Preset number and frequency

If the signal transmission of the Radio Data System station is too 
weak, this unit may not be able to receive Radio Data System 
information completely. In particular, RT (Radio Text) information 
uses a lot of bandwidth, so it may be less available compared to 
other types of information.

1

2