BORT KEX-2500 93720100 - Инструкция по эксплуатации - Страница 4

4

-  ACCIDENTAL START-UP HAZARD.

  Before doing work on the cleaner, REMOVE the plug.

-  INJURY HAZARD.

  Before  pressing  the  trigger,  GRIP  the  gun  firmly  to 

counteract the recoil.

-  CONTAMINATION HAZARD.

  COMPLY  WITH  the  requirements  of  the  local  water 

supply company. According to DIN 1988, power-jet 

cleaners may only be connected to the mains drinking 

water supply if a backflow preventer valve with drain 

facility is installed in the supply hose.

-  ACCIDENT HAZARD.

  Maintenance and/or repair of electrical components 

MUST be carried out by qualified staff.

-  INJURY HAZARD.

  DISCHARGE residual pressure before

  disconnecting the cleaner hose.

-  ACCIDENT HAZARD.

  Before using the cleaner, CHECK every time that the 

screws are fully tightened and that there are no bro-

ken or worn parts.

-  EXPLOSION AND ELECTRIC SHOCK HAZARD.

  Only USE detergents which will not corrode the coat-

ing materials of the high pressure hose/electrical ca-

ble.

-  INJURY HAZARD.

  ENSURE that all people or animals keep a minimum 

distance of 16 yd. (15m) away.

SAFETY VALVE

The safety valve also functions as a pressure limiting 

valve. When the gun trigger is released, the safety valve 

opens and the water recirculates through the pump inlet.

CONNECTION

1.  Attach the high pressure hose to the pressure water 

outlet of the machine.

2.  Attach the spray handle to the high pressure hose. 

Prior to operating the machine please ensure that the 

high pressure hose has been completely uncoiled. 

Whilst the machine is in operation the hose MUST not 

loop.

3.  Mount the nozzle or any other equipment you want 

to use.

4.  Connect the machine to the water and power supplies.

INSTALLATION, ELECTRICAL AND WATER 

CONNECTIONS

●  Ensure  that  the  safety  lock  on  the  trigger  is  used, 

when you have stopped using the pressure washer to 

prevent accidental operation.

SAFETY “MUST NOTS”

-

  EXPLOSION OR POISONING.

  DO NOT use the cleaner with inflammable or toxic liq

-

uids, or any products which are not compatible with 

the correct operation of the cleaner.

-  INJURY HAZARD.

  DO NOT direct the water jet towards people or ani-

mals.

-  ELECTRIC SHOCK HAZARD.

  DO NOT direct the water jet towards the unit itself, 

electrical parts or towards other electrical equipment.

-  SHORT CIRCUIT HAZARD.

  DO NOT use the cleaner outdoors in case of rain.

-  INJURY HAZARD.

  DO NOT allow children or incompetent persons to use 

the cleaner.

-  ELECTRIC SHOCK HAZARD.

  DO NOT touch the plug and/or socket with wet hands.

-  ELECTRIC SHOCK AND SHORT CIRCUIT HAZARD.

  DO NOT use the cleaner if the electrical cable is dam-

aged.

-  EXPLOSION HAZARD.

  DO NOT use the cleaner if the high pressure hose is 

damaged.

-  ACCIDENT HAZARD.

  DO NOT jam the trigger in the operating position.

-  ACCIDENT HAZARD.

Check  that  the  data  plates  are  affixed  to  the  cleaner,  if 

not, inform your dealer. Cleaners without plates must 

NOT  be  used  as  they  are  unidentifiable  and  potentially 

dangerous.

-  EXPLOSION HAZARD.

  DO NOT tamper with or alter the calibration of the 

safety valve.

-  HAZARDOUS  ALTERATION  OF  OPERATING  PER

-

FORMANCE.

  DO NOT alter the original diameter of the spray head 

nozzle.

-  ACCIDENT HAZARD.

  DO NOT leave the cleaner unattended.

-  SHORT CIRCUIT HAZARD.

  DO NOT move the cleaner by pulling on the electrical ca-

ble.

SAFETY “MUSTS”

-  SHORT CIRCUIT HAZARD.

  All electrical conductors MUST BE PROTECTED

  against the water jet.

-  ELECTRIC SHOCK HAZARD.

  The cleaner MUST ONLY BE CONNECTED to a cor

-

rectly earthed power supply.

  -  Use a Residual Current Device (RCD) of not more 

than 30 mA, at the plug socket when using this appli-

ance.

-  INJURY HAZARD.

  The high pressure may cause materials to bounce off 

surfaces at speed; therefore protective clothing and 

safety goggles MUST BE WORN.