ADA GroundDrill-16 - Инструкция по эксплуатации - Страница 8

8

English

MAINTENANCE

Make sure the engine is off before you begin any maintenance or repairs. 

To prevent accidental engine start disconnect spark plug cap.

Note: 

Check and adjust regularly the engine if you want to achieve high 

performance of it. Regularly maintenance extends engine life. In the table 

below there is a maintenance schedule with regular service periods.

Note:

(1)  Clean  more  often  under  dusty  conditions  or  when  airborne  debris  is 

present.

(2)  Change  engine  oil  every  25  hours  when  used  under  heavy  load  or  in 

high ambient temperatures.

CHANGE ENGINE OIL 

1. Drain the used oil while the engine is warm.

2. Remove the filler cap/dipstick, the drain bolt and sealing washer. Drain 

oil.

3. Reinstall the drain bolt and sealing washer, and tighten it securely.

4.  With  the  engine  in  a  level  position,  fill  to  the  upper  limit  mark  on  the 

dipstick with the recommended oil. Check the oil level.

5. Reinstall the oil filler cap/dipstick securely.

MAINTENANCE OF AIR FILTER

A dirty air filter will restrict air flow to the carburetor, reducing engine per

-

formance. If you operate the engine in very dusty areas, change the air 

filter more often than specified in the maintenance schedule.

a) Remove the air filter cap. Detach the element;

b)  Check  the  condition  of  the  paper  filtering  element.  Damaged  or  durty 

element must be changed. 

c) Put the detail on its place.

Caution: Never use gasoline or other dissolvents to clean air filter. Ignition 

could result. Operating the engine without an air filter, or with a damaged 

air filter, will allow dirt to enter the engine, causing rapid engine wear.

Fuel tank 

and filter

clean

*

Fuel line

check

Every 2 years (Replace if necessary)