VITEK VT-6400 - Инструкция по эксплуатации - Страница 9

ENGLISH

9

tion that temperature of channel 1 is equal or 
below 2

º

С.

Repetition function (with interval from 0 to 15 
minutes) can be programmed for the signals 
enlisted above.

a)   Current time and alarm mode selection

In order to switch to this mode press buttons 

«+»/«-» until the icon (

) starts blinking.

b)   Setting time, date and language.
1.   Press and hold button SET in current time 

and alarm mode to set up current time and 
calendar. 

2.   Day of the week starts blinking. Setting 

language:

Select the language of days of the week 
indication you need using buttons «+»/ «-»: 
English, German, French, Italian, Spanish, 
or Dutch. Press button SET to confirm input 
language selection. 

.   Selection of city code:
 

Select city code using «+»/ «-» buttons. 
There is list of city codes in appendix below. 
Press button SET to confirm input city code 
selection.

4.   Setting latitude degrees (

º

) (if «USR» is 

selected as city code):

Set value you need using buttons «+»/ «-». 
Press button SET to confirm input value. 
Repeat the procedure described above 
for setting minutes of latitude, degree and 
minutes of longitude. 

5.   Setting time zone (if «USR» is selected as 

city code):

Set time zone using buttons «+»/«-» with 
step 0 minutes. Press button SET to 
confirm input value.

6.   Setting summer time DST (if «USR» is 

selected as city code or city is located in 
DST zone)

Switch on/off DST function using buttons 
«+»/«-». Press button SET to confirm input 
value.

7.   Repeat the operations described above for 

setting year, month, calendar display format 
(day/month, month/day), time display 
format (12-/24 hours), local time: hours and 
minutes.

.   On input completion system returns to 

normal mode of current time and alarm 
indication

.

Notice: in order to return to normal mode of 

current time and alarm indication press and 
hold button SET any time. All setting will be 
reset.

c)  Switching between different data indication 

in current time/calendar mode

In current time/calendar mode on every 
pressing of SET button system switches 
between the next parameters’ indication:

•  Hours: minutes: day of week,
•  Hours: minutes: city,
•  Hours: minutes: seconds,
•  Month: day: year (or day: month: year, 

depending on settings),

•  Hours: minutes for UTC (Universal 

Coordinated Time).

d)   Switching on/off sound signals of alarm 

clock

1.  

In current time/calendar mode on every 
pressing of 

ALARM/CHART

 button system 

switches between the next parameters’ 
indication

:

 -   time of every day sound signal (if the option 

is off, “

OFF” is displayed),

 -   time of one-time sound signal

 (if the option 

is off, “

OFF” is displayed),

 -   time of preset sound signal (if the option is 

off, “

OFF” is displayed).

2.   During display of the alarms listed above 

pressing buttons 

«+»/«-» leads to switching 

on/off the adequate alarm.

Notice: during alarm selection mode press 

button 

SET to return to normal mode of 

current time/alarm indication any time.

e)   Setting alarm sound signals
1.   Press button ALARM/CHART in current 

time/alarm mode to select alarm 
parameters which you want to set up.

2.   Press and hold ALARM/CHART button until 

alarm hour digits start blinking.

.   Setting alarm hours: set alarm hours using 

buttons «+»/ «-». Press button ALARM/
CHART in order to confirm set value.

4.   Setting alarm minutes: set alarm minutes 

using buttons «+»/ «-». Press button 
ALARM/CHART in order to confirm set 
value.

5.   Setting time of alarm signal repetition 

(all tree alarms have the same time of 
repletion): 

6400IM.indd   9

23.01.2009   10:14:43