VITEK VT-6400 - Инструкция по эксплуатации - Страница 11

ENGLISH

11

Safety guards

1.    Read this operation manual carefully before 

you start using these appliances.

2.    Do not immerse these appliances into water.
.    Do not use abrasive chemicals for cleaning 

these appliances, as they could cause 
housing and internal parts damage.

4.    Do not expose these appliances to strong 

physical impacts and strikes (dust and 
moisture are dangerous too) as they may 
cause malfunctions, shorten time of service, 
battery damage, and housing details 
deformation as result.

5.    Do not disassemble this unit, doing so 

leads to warranty cancellation. There are no 
serviceable parts inside demanding user’s 
attention.

6.    Use new batteries only, meeting the 

specifications of operating manual exactly. 
Do not install old and new batteries at the 
same time.

Technical specifications

Temperature 

measurement

Basic block

Operating range

from -5,0 up to +50,0°С

(from 2,0 up to 

122,0°F)

Accuracy

0,1°С

(0,2°F)

Remote sensor

Operating range

from -25°С till +60°С 

(when wired probe is 

allocated outdoors)

(from -1,0 up to 

140,0°F)

Accuracy

0,1°С

(0,2°F)

Relative humidity 

measurement

Basic block

Operating range

from 25% to 95%

Accuracy

1%

Remote sensor

Operating range

from 25% to 95%

Accuracy

1%

Data transfer from 

remote sensor

Frequency

4 MHz

Number of remote 

sensors connections

 maximum

Range of action

60 meters maximum

Every

4-47 seconds

Pressure 

measurement

Operating range

from 750 up to 1100 

hPa/ millibar at 25°С

(from 22,15 up to 2, 

49 mercury inches)

Every

20 minutes

Calendar

Time display format:

12- or 24-hours a day  

hour: minutes

Date format:

Day-month; month-day

Day of week in 6 

languages

English, German, 

French, Italian, 

Spanish, Dutch

Sound signal:

2-minutes long 

with gradual signal 

multiplication and 

repetition function

Icing-up warning

Temperature limits 

overrun warning

Weather impairment 

warning (storm 

warning)

Power supply

Basic block

Power source 7,5V 200 

mA

4 batteries of UM- or 

АА type, 1.5 V

Remote sensor

2 batteries of UM- or 

АА type, 1.5 V

Weight

Basic block

459 g (without 

batteries)

Remote sensor

62 g (without batteries)

Dimensions

Basic block

21(L) х 122(H) х 0(D)

Remote sensor

55.5(L) х 101(H) х 

24(D)

Attention!

- 

It is not recommended to allocate 
the remote sensor outdoors when 
temperature is below 0°С. It can 
decrease service life of batteries, 
reduce effective distance of data 
transfer and cause problems with LCD 
display indication (if there is any on the 
sensor). In this case remote sensor 
should be allocated indoors and its 
wired probe – outdoors.

-     Because of printing limitations display 

presented in these instructions may differ 
from the actual display in appearance. 

6400IM.indd   11

23.01.2009   10:14:44