Uniel UTV-82K - Инструкция по эксплуатации - Страница 17

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

RU 16

UTV 82

RU 17

To set the time zone, make sure the display shows the time with the 

ZONE

 icon. Then

press and hold 

MODE

.

Press UP (▲) or 

DOWN

 (▼) to adjust value in steps of 30 min. Press and hold either

button for fast advance. Press 

MODE

 to confirm your selection.

SELECT THE CLOCK/CALENDAR DISPLAY

Each time you press 

MODE

, you may rotate from one of the following displays to the

next:

- Hour: Minute: Second

- Hour: Minute: Weekday

- Hour: Minute: Weekday of the Time Zone

- Hour: Minute: Second of the Time Zone

- Day: Month 

• WAKE-UP ALARM FUNCTION

There are three time alarms available on the main unit:

* Weekday Alarm

The alarm sound will be activated and the icon will flash on weekdays (Mo-Fr) when it

is armed and the alarm time is reached.

* Single Alarm

The alarm sound will be activated and the icon will flash when it is armed and the alarm

time is reached. Once it finished, it will be disabled automatically

* Pre-Alarm

The pre-alarm will be activated and the icon will flash if the temperature of channel 1 is

falling to +0 ºC or below.

It is programmable 15, 30, 45, 60 or 90 minutes earlier than the weekday alarm or single

alarm time.

ACTIVATING / DEACTIVATING THE TIME ALARMS

1. Press 

ALARM

 to rotate between:

- Weekday Alarm Time (displays OFF if weekday alarm deactivated)

- Single Alarm Time (displays OFF if single alarm deactivated)

- Pre-Alarm Time (displays OFF if pre-alarm deactivated)

2. When the above alarms are displayed, pressing UP (▲) will activate, pressing

DOWN

 (▼) will deactivate the corresponding alarm.

Note:

 Press 

MODE

 anytime during above alarm selection mode to return to normal clock

display.

SETTING THE TIME ALARMS

1. Press 

ALARM

 to select the alarm which you wish to configure.

2. Press and hold 

ALARM

 until hour starts flashing in the display

3. Set Alarm Hour:

Press 

UP

 (▲) or 

DOWN

 (▼) to adjust. Press and hold either button for fast changes.

Press 

ALARM

 to confirm your selection.

4. Set Alarm Minutes:

Press 

UP

 (▲) or 

DOWN

 (▼) to adjust. Press and hold either button for fast changes.

Press 

ALARM

 to confirm your selection

5. Upon completion the display will be returned to the alarm selection screen.

Note: Pre-alarm cannot be activated if weekday alarm or single alarm is not enabled.

STOP THE ALARM SOUND

The alarm will sound for 2 minutes with increasing intensity.

To stop it, press 

ALARM

 during the Alarm Sound to disable the alarm.

Note: For weekday alarm, pressing 

ALARM

 will only disable the alarm for the current

day. The alarm will be activated again the next day (if it falls within Monday to Friday).

If the Alarm is not interrupted by pressing the ALARM key while the sound is active, it

will repeat itself after 8 minutes for 3 times. If you want to stop the alarm in one of the 8

minute periods, you have to do as described in “Activating/Deactivating the Time Alarms”.

• TROUBLESHOOTING

In case of a malfunction, always check the batteries and replace them in the main unit

and in the sensor(s) with new ones.

Please also check below issues before contacting customer service.