Uniel UTV-82K - Инструкция по эксплуатации - Страница 16

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

RU 16

UTV 82

code and will then no longer be recognized by the display unit. You can resolve this

problem by:

- removing the batteries from the display unit and replacing them with new ones 

or

- if the batteries are still O.K., repeating the logging in procedure as described above by

pressing and holding the▼ button for 3 seconds and while the wave icon is blinking, press

and hold the ▼ button again for 3 seconds. The temperature indicator will start to blink

indicating that a new sensor is being searched for and will be logged in.

VIEWING REMOTE (CHANNEL) TEMPERATURE

Select the TEMPERATURE window.

Static Display: Press the 

CHANNEL

 button to select measurements from different

remote sensors (channel 1, 2 or 3).

Channel Auto-Scan Display: To enable an automatic scan of all present channels, press

and hold 

CHANNEL

, until the icon is displayed. The measurements from each

remote channel will be alternately displayed with a 5 seconds viewing.

NOTE:

 the channel auto-scan feature can be activated only if there are more than one

remote sensors operating and are set to different channels.

PROGRAMMING TEMPERATURE IN CELSIUS OR FAHRENHEIT

Select the TEMPERATURE window.

Press and hold 

MODE

 button for 3 seconds to toggle the temperature unit in Celsius (ºC)

or Fahrenheit (ºF).

TEMPERATURE ALARM

Select the TEMPERATURE window.

Press 

ALARM

 button selecting the desired alarm, the upper temperature alert with icon

(if disabled, display shows 

OFF

), or lower temperature alert with icon (if disabled,

display shows 

OFF

).

Press and hold 

ALARM

 button until the temperature digits flashing. Adjust the

temperature digits using the 

UP

 (▲) or 

DOWN

 (▼). Press and hold either button for fast

setting. Press the 

ALARM

 to confirm selection and return to the temperature alarm

selection screen

ACTIVATING OR DEACTIVATING TEMPERATURE ALARMS:

Once the above alerts are displayed, press the 

UP

 (▲) to enable or 

DOWN

 (▼) to disable the 

alert.

VIEWING MAX/MIN READINGS

Select the TEMPERATURE window.

Press the 

MEM

 button to read the minimum temperature of all sensors (indoor and

remote) with the MIN, next MEM press the maximum values with the 

MAX

 icon and then

back to the current values.

RESETTING TEMPERATURE MEMORIES

Select the TEMPERATURE window.

Press and hold the MEM button for 3 seconds to clear all max/min memories.

• CLOCK WINDOW

For all operations described in Chapter 4.3, press 

UP

 (▲) or 

DOWN

 (▼) until the

TIME

 icon, in the left corner of the time window, begins to flash.

HOW TO SET THE CLOCK MANUALLY

To set the clock manually, make sure the display shows the time (

not

 the 

ZONE

) and then

press and hold MODE.

Now it will show the language. You may choose among English (En), German (DE),

French (Fr), Italian (IT), Spanish (SP), Dutch (Du) and Swedish (SW). Press 

UP

 (▲) or

DOWN

 (▼) to change it.

Press 

MODE

 to confirm. Repeat the same procedure to set the year, month, day,

day-month format, 12/24 hour format, hour and minute. During the setting, press and hold will 

change the value rapidly.

If there is an item you do not wish to change, simply press 

MODE

 to bypass the item.

After the last setting, pressing 

MODE

 will exit the setting mode and return to the clock

mode.

HOW TO SET THE TIME ZONE