RST 02929 (Meteoscan Pro 929) - Инструкция по эксплуатации - Страница 43

Notes to pressure sensitivity setting for weather forecasting: 

The pressur

e threshold can be set to suit the user’s r

equirement for w

eather fore

casting from 2-4hPa (default 2hPa). For ar

eas that experience fr

e-

quent changes in air pressur

e requir

es a higher hPa setting compared to an ar

ea where the air pr

essure is stagnant. For example

 if 4hPa is select-

ed, then there must be a fall or rise in air pr

essure of at least 4hPa needed to change the w

eather fore

cast icons. 

Notes to storm threshold setting

The storm threshold means the w

eather icons (rain and clouds) will begin to flash indicating a dr

amatic change in pressur

e, indicating a storm.

Similar to the general pr

essure sensitivity setting it is possible to adjust the storm thr

eshold sensitivity form 3-9hPa (default 4hPa). When ther

e is a

fall ov

er pressur

e threshold within 3 hours, the storm for

ecasting will be activ

ated, the clouds with rain icon and tendency ar

ro

ws will flash for 3

hours indicating the storm wa

rning feature has been activ

ated.

Indoor temperature

Press the 

MENU

key the eighth time to select the INDOOR TEMPERA

TURE section, INDOOR

TEMPERA TURE section digits will start flashing. Enter the temper

ature unit mode, pr

ess the

UP/+

or 

DOWN/-

key to select temper

ature unit betw

een   and  

Press 

ENTER

key to enter the follo

wing modes, then press the 

UP/+

or 

DOWN/-

key to

select the display or set the value:  

•

The indoor temper

ature high alarm setting. Pr

ess the 

ON/OFF

key to on/off the alarm.

If alarm is enabled, an alarm symbol 

appears in the display indicating the alarm

function has been enabled

•

The indoor temper

ature lo

w alarm setting. Press the 

ON/OFF

key to on/off the alarm. If alarm is enabled, an alarm symbol  

appears in the

display indicating the alarm function has been enabled

•

Reset the maximum indoor temperatur

e value. When both the indoor temper

ature v

alue and MAX icon ar

e flashing, hold the 

ENTER

key for

3s, the maximum indoor temperatur

e value will be r

eset to current r

eading.

•

Reset the minimum indoor temperatur

e value. When both the indoor temper

ature v

alue and MIN icon ar

e flashing, hold the 

ENTER

key for 3s,

the minimum indoor temperatur

e value will be r

eset to current r

eading.

RST 02929 PRO 10

01929Manual-2010:01929Manual-2010  08.11.2010  15:28  Page 10