Материнские платы GIGABYTE GA MA790FXT UD5P - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 49 -
BIOS Setup
2-6
Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
OnChip IDE Channel
[Enabled]
OnChip SATA Type
[Native IDE]
x
OnChip SATA Port4/5 Type
IDE
Onboard SATA/IDE Device
[Enabled]
Onboard SATA/IDE Ctrl Mode
[IDE]
Smart Backup
[Press Enter]
Onboard Audio Function
[Enabled]
Onboard LAN device
[Press Enter]
Onboard 1394 Function
[Enabled]
OnChip USB Controller
[Enabled]
USB EHCI Controller
[Enabled]
USB Keyboard Support
[Disabled]
USB Mouse Support
[Disabled]
Legacy USB storage detect
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
x
ECP Mode Use DMA
3
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
OnChip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
OnChip SATA Type (AMD SB750 South Bridge, SATA2_0~SATA2_3 connectors)
Configures the operating mode of the integrated SATA2_0~SATA2_3 controller.
Native IDE
Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that
support Native mode.
RAID
Enables RAID for the SATA controller.
AHCI
Configures the SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing
and hot plug.
OnChip SATA Port4/5 Type (SATA2_4/SATA2_5 connectors)
This option is configurable only when
OnChip SATA Type
is set to
RAID
or
AHCI
. Configures the
operating mode of the integrated SATA2_4/SATA2_5 connectors.
IDE
Disables RAID for the SATA controller and configures the SATA controller to
PATA mode. (Default)
As SATA Type
The mode depends on the
OnChip SATA Type
settings.
Onboard SATA/IDE Device (GIGABYTE SATA2 Chip, GSATA2_0~3 connectors)
Enables or disables the SATA controller integrated in the GIGABYTE SATA 2 chip. (Default:
Enabled)
Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip, GSATA2_0~3 connectors)
Allows you to decide whether to configure the SATA controller to AHCI mode.
IDE
Configures the SATA controller to PATA mode. (Default)
AHCI
Configures the SATA controller to AHCI mode.
