Материнские платы GIGABYTE GA MA790FXT UD5P - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 41 -
BIOS Setup
2-3
MB Intelligent Tweaker(M.I.T.)
•
Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)
•
When the
System Voltage Optimized
item blinks in red, it is recommended that you set
the
System Voltage Control
item to
Auto
to optimize the system voltage settings.
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the
CPU being used.
CPU NorthBridge Freq.
Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable
range is dependent on the CPU being used.
CPU Host Clock Control
Enables or disables the control of CPU host clock.
Auto
(default) allows BIOS to automatically
adjust the CPU host frequency.
Manual
allows the
CPU Frequency
(Mhz)
item below to be
configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to
allow for automated system reboot, or clear the CMOS values to reset the board to default values.
CPU Frequency (Mhz)
Allows you to manually set the CPU host frequency. The adjustable range is from 200 MHz to
500 MHz.
Important
It is highly recommended that the CPU frequency be set in accordance with the CPU
specifications.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Clock Ratio
[Auto]
2700 Mhz
CPU NorthBridge Freq.
[Auto]
2000 Mhz
CPU Host Clock Control
[Auto]
x
CPU Frequency (MHz)
200
PCIE Clock (MHz)
[Auto]
HT Link Frequency
[Auto]
Set Memory Clock
[Auto]
x
Memory Clock
x6.66
1333Mhz
DRAM Configuration
[Press Enter]
******** System Voltage Optimized ********
System Voltage Control
[Auto]
x
DDR3 Voltage Control
Auto
x
NB Voltage Control
Auto
x
SB/HT Voltage Control
Auto
x
NB/PCIe/PLL Voltage Control
Auto
x
CPU NB VID Control
Auto
x
CPU Voltage Control
Auto
Normal CPU Vcore
1.3500V
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
(Note) This item is present only if you install a CPU that supports this feature.
