GIGABYTE GA GC230D rev 1 0 - Инструкция по эксплуатации - Страница 29

- 29 -

BIOS Setup

2-4

Advanced BIOS Features

Hard Disk Boot Priority

Specifies the sequence of loading the operating system from the installed hard drives.  Use the up
or down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus
key <-> (or <PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when
finished.

First/Second/Third Boot Device

Specifies the boot order from the available devices. Use the up or down arrow key to select a
device and press <Enter> to accept. Options are: LS120, Hard Disk, CDROM, ZIP, USB-FDD,
USB-ZIP, USB-CDROM, USB-HDD, LAN, Disabled.

Password Check

Specifies whether a password is required every time the system boots, or only when you enter
BIOS Setup. After configuring this item, set the password(s) under the 

Set Supervisor/User

Password

 item in the BIOS Main Menu.

Setup

A password is only required for entering the BIOS Setup program. (Default)

System

A password is required for booting the system and for entering the BIOS Setup
program.

HDD S.M.A.R.T. Capability

Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your
hard drive. This feature allows your system to report read/write errors of the hard drive and to
issue warnings when a third party hardware monitor utility is installed. (Default: Disabled)

Limit CPUID Max. to 3

Allows you to determine whether to limit CPUID maximum value. Set this item to 

Disabled

 for

Windows XP operating system; set this item to 

Enabled

 for legacy operating system such as

Windows NT4.0. (Default: Disabled)

`

KLJI

`