Материнские платы GIGABYTE GA 8S648FX 775 C - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GA-8S648FX-775(-C) Motherboard
- 36 -
English
2-4
Power Management Setup
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1/POS (Power On Suspend). (Default value)
S3(STR)
Set ACPI suspend type to S3/STR (Suspend To RAM).
Soft-Off by PWR-BTTN
Off
Press power button to turn off the system instantly. (Default value)
Suspend
Press power button for 4 seconds to turn off the system. The system will enter
suspend mode if the button is pressed for less than 4 seconds.
System After AC Back
Off
When AC-power is back to the system, the system will be in "Off" state.
(Default value)
On
When AC-power is back to the system, the system will be always in "On" state.
Laststate
When AC-power is back to the system, the system will return to the last state
before AC-power was off.
IRQ [3-7, 9-15], NMI
When IRQ [3-7, 9-15] or NMI triggered, the suspend timer will be reloaded to prevent system from
getting into green mode.
Disabled
Don’t monitor IRQ [3-7, 9-15] or NMI.
Enabled
Monitor IRQ [3-7, 9-15] or NMI. (Default value)
ModemRingOn
Disabled
Disable ModemRingOn function.
Enabled
Enable ModemRingOn function. (Default value)
PME Event Wake Up
Disabled
Disable this function.
Enabled
Enable PME Event Wake up. (Default value)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type
[S1(POS)]
Soft-Off by PWR_BTTN
[Off]
System After AC Back
[Off]
IRQ [3-7, 9-15], NMI
[Enabled]
ModemRingOn
[Enabled]
PME Event Wake Up
[Enabled]
Power On by Keyboard
[Disabled]
Power On by Mouse
[Disabled]
Resume by Alarm
[Disabled]
x Month Alarm
NA
x Day(of Month)
E v e r y d a y
x Time(hh:mm:ss)
0 : 0 : 0
Power LED in S1 state
[Blinking]
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Default
F7: Optimized Defaults
Item Help
Menu Level
`
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
