Материнские платы GIGABYTE GA 8S648FX 775 C - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GA-8S648FX-775(-C) Motherboard
- 34 -
English
2-3
Integrated Peripherals
IDE1 Conductor Cable
Auto
BIOS autodetects IDE1 conductor cable .(Default Value)
ATA66/100/133
Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your
IDE device and cable are compatible with ATA66/100/133).
ATA33
Set IDE1 Conductor Cable to ATA33. (Please make sure your IDE
device and cable are compatible with ATA33)
IDE2 Conductor Cable
Auto
BIOS autodetects IDE2 conductor cable. (Default Value)
ATA66/100/133
Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your
IDE device and cable are compatible with ATA66/100/133)
ATA33
Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE
device and cable are compatible with ATA33)
On-Chip Primary PCI IDE
Enabled
Enable onboard 1st channel IDE port. (Default value)
Disabled
Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled
Enable onboard 2nd channel IDE port. (Default value)
Disabled
Disable onboard 2nd channel IDE port.
AC97 Audio
Enabled
Autodetect AC97 audio function. (Default value)
Disabled
Disable AC97 audio function.
Onboard LAN device
(
*
)
Enabled
Enable Onboard LAN device function. (Default value)
Disabled
Disable this function.
(
*
)
Only for GA-8S648FX-775.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
IDE1 Conductor Cable
[Auto]
IDE2 Conductor Cable
[Auto]
On-Chip Primary PCI IDE
[Enabled]
On-Chip Secondary PCI IDE
[Enabled]
AC97 Audio
[Enabled]
Onboard LAN device
(
*
)
[Enabled]
USB Controller
[Enabled]
USB Legacy Support
[Disabled]
SiS Serial ATA Controller
[Enabled]
SiS Serial ATA Mode
[RAID]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Serial Port 2
[2F8/IRQ3]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[ECP]
ECP Mode Use DMA
[3]
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Default
F7: Optimized Defaults
Item Help
Menu Level
`
[Auto]
Auto-detect IDE
cable type
[ATA 66/100/133]
Set Conductor Cable
to ATA66/100/133 (80
Pins)
[Disabled]
Set Conductor Cable
ATA33 (40 Pins)
