Материнские платы GIGABYTE GA 8I915G Pro rev 1 x - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GA-8I91 5G Pro Mothe rboard
- 44 -
English
CPU Ho st Clock C ontrol
Please note that if y our system is ov erclocked and cannot restart, please w ait 20secs.
for automatic sy stem restart or clear the CMOS setup data and perform a safe restart.
Disabled Disable CPU Host Clock Control. (Default v alue)
Enab led Enabl e CPU Host Clock Con trol.
CPU Host Frequency (M hz)
This item w ill be av ailable w hen "CPU Host Clock Control" is set to Enabled.
100MHz ~ 355MHz
Set CPU Host Clock from 100MHz to 355MHz.
If y ou use FSB800 Pentium 4 processor, please set "CPU Host Frequency " to 200MHz.
Incorrect using it may cause y our sy stem broken. For pow er End-User use only !
Memor y Frequency For
Wrong frequency may make sy stem can't boot, c lear CMOS to ov ercome w rong frequency issue.
for FS B(Front Si de Bus) fr equency =53 3MHz,
2.5
Memor y Frequen cy = Hos t clock x 2.5.
3
Memor y Freque ncy = Ho st clock x 3.
4
Memor y Freque ncy = Ho st clock x 4.
Auto
Set M emory fre quency by DRAM SP D data. ( Default v alue)
for FS B(Front Si de Bus) fr equency =80 0MHz,
1.66
Memor y Frequen cy = Hos t clock X 1.66
2.0
Memor y Frequen cy = Hos t clock X 2.0.
2.66
Memor y Frequen cy = Host clock X 2.66.
Auto
Set M emory fre quency by DRAM SP D data. ( Default v alue)
Memory Frequency (Mhz)
The values depend on "Memory Frequency For" item.
DIMM O verVoltage C ontrol
Please note that by ov erclocking y our sy stem through the increase of the DIMM v oltage, damage to the
memory may occur.
Normal
Set DIMM Ov erVoltage Control to Normal. (Default v alue)
+0.1V
Set DIMM Ov erVoltage Control to +0.1V.
+0.2V
Set DIMM Ov erVoltage Control to +0.2V.
+0.3V
Set DIMM Ov erVoltage Control to +0.3V.
Incorrect using it may cause y our sy stem broken. For pow er End-User use only !
PCI-E O verVoltage C ontrol
Normal
Set PCI-E Ov erVoltage Control to Normal. (Default v alue)
+0.1V
Set PCI-E Ov erVoltage Control to +0.1V.
+0.2V
Set PCI-E Ov erVoltage Control to +0.2V.
+0.3V
Set PCI-E Ov erVoltage Control to +0.3V.
CPU Voltage Co ntrol
Supports adjustable CPU Vcore from 0.8375V to 1.6000V. (Default v alue: Normal)
Warning: CPU may be damaged or reduce CPU life-cy cle w hen CPU is ov er-v oltage.
Normal C PU Vcore
Display y our CPU Vcore Voltage.
