Telefunken TF-CCR8202 - Инструкция по эксплуатации - Страница 10

Operation

9

9

Operation

Radio operations

In Radio mode press the BND button to 
select a radio band: FM1 => FM2 => FM3.

Band select

• Shortly press        or       button. AUTO 

will be displayed on the screen. The radio 
will automatically search for the previous or 
next frequency with a strong and clear 
signal. 

• Press and hold

       or

will go to the manual tuning mode, MANUAL 
will be displayed. Press       /       buttons 
repeatedly to adjust the needed frequency 
manually. If both buttons have not been 
pressed for several seconds, the device will 
return to AUTO mode. 

Automatic / manual tuning

Storing and recalling stations

Auto storing
Press and hold the 

BND

 button for 

several seconds to automatically find and 
store the 6 strongest stations in the 
current band corresponding to the preset 
number button. Press either of the 6 
number buttons to recall a stored station.

Manual storing and recalling
• Tune to a station as described above

in the Automatic / manual tuning section.

• Press and hold one of the 1- 6 preset

button for 2 seconds until LCD shows the 
corresponding number, which indicates 
that station is stored on this number.

• Press 1- 6 preset buttons to listen to

stored stations.

Note: the unit can stored up to 6 stations 
for each of the three bands.

USB/SD operations

Carefully insert an SD memory card into 

the card slot on the front panel. Unit starts 
playback automatically. To disconnect the 
memory card, press it until a click, and then 
carefully pull it out from the slot. 

SD card slot

Carefully connect a USB driver to the 

USB port on the front panel. Unit starts 
playback automatically. 

USB port

USB format supports 2.0. Capacity: up to 

32 GB. SD cards capacity: up to 32 GB. 
Supported file systems are FAT/FAT32. 
Note: Because of the great variety of 
products with SD-card slots and their 
sometimes quite manufacturer-specific 
functions the producer can neither 
guarantee that all devices will be 
recognized nor that all operating options 
that are possible in theory will actually work. 
Before disconnecting a storage, switch the 
unit to another mode. 

For correct and satisfactory operation, 

licensed SD/MMC memory cards of well-
known brands should 
be used with this unit. Avoid using memory 
cards of unknown brands. Some models of 
USB devices cannot be supported by this 
unit due to incompatibility.

According to the USB 1.1/2.0 Standard, 

usage of a USB device with power current 
consumption exceeding 500 mA is not 
recommended without supplementary 
power supply. Failure to use supplementary 
power for connected USB drives with power 
consumption exceeding this value 
as well as defective USB drives may cause 
mechanical or thermal changes of elements 
of the unit as well as failure of internal 
elements of USB port. Such damages are 
not warranty cases.

USB/SD notes