JVC KD-SH1000 - Инструкция по эксплуатации - Страница 34

34

ENGLISH

More about this unit

Basic operations 

Turning on the power

•  By pressing SOURCE on the unit, you can 

also turn on the power. If the source is ready, 
playback also starts.

Turning off the power

•  If you turn off the power while listening to a 

disc, disc play will start from where playback 
has been stopped previously, next time you 
turn on the power.

Tuner operations 

Storing stations in memory

•  During SSM search...

 – All previously stored stations are erased and 

stations are stored newly.

 – Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency).

 – When SSM is over, the station stored in 

No. 1 will be automatically tuned in.

•  When storing a station manually, the 

previously preset station is erased when a new 
station is stored in the same preset number.

FM RDS operations

•  Network-Tracking Reception requires 

two types of RDS signals—PI (Programme 
Identification) and AF (Alternative 
Frequency) to work correctly. Without 
receiving these data correctly, Network-
Tracking Reception will not operate correctly.

•  If a Traffic Announcement is received by 

TA Standby Reception, the volume level 
automatically changes to the preset level (TA 
VOL) if the current level is lower than the 
preset level.

•  When Alternative Frequency Reception 

is activated (with AF selected), Network-
Tracking Reception is also activated 
automatically. On the other hand, Network-
Tracking Reception cannot be deactivated 
without deactivating Alternative Frequency 
Reception. (See page 24.)

  To keep discs clean

A dirty disc may not play correctly. 
If a disc does become dirty, wipe it 
with a soft cloth in a straight line 
from center to edge.
•  Do not use any solvent (for example, 

conventional record cleaner, spray, thinner, 
benzine, etc.) to clean discs.

  To play new discs

New discs may have some rough 
spots around the inner and outer 
edges. If such a disc is used, this 
unit may reject the disc.
To remove these rough spots, rub the edges 
with a pencil or ball-point pen, etc.

  How to handle SD card

SD cards are precision products. DO NOT 
impact, bend, drop, or wet them.

Warped disc

Sticker

Sticker residue

Stick-on label

Do not use the following discs: