JVC KD-SH1000 - Инструкция по эксплуатации - Страница 12

12

ENGLISH

5 

Store the setting.

6 

To store other PTY codes into other 
preset numbers.

7 

Finish the procedure.

Using the standby receptions

  TA Standby Reception

TA Standby Reception allows the unit to switch 
temporarily to Traffic Announcement (TA) 
from any source other than AM.
The volume changes to the preset TA volume 
level if the current level is lower than the preset 
level (see page 24).
•  If DAB tuner is connected, Standby Reception 

also works to search for a DAB service 
broadcasting Traffic Announcement.

To activate TA Standby Reception

The TP (Traffic Programme) 
indicator either lights up or 
flashes.

•  If the TP indicator lights up, TA Standby 

Reception is activated.

•  If the TP indicator flashes, TA Standby 

Reception is not yet activated. (This occurs 
when you are listening to an FM station 
without the RDS signals required for TA 
Standby Reception.)

To activate TA Standby Reception,

 tune in 

to another station (or DAB service) providing 
the related signals. The TP indicator will stop 
flashing and remain lit.

Repeat steps 

2

 to 

5

.

To deactivate the TA Standby Reception

The TP indicator goes off.

  PTY Standby Reception

PTY Standby Reception allows the unit to 
switch temporarily to your favorite PTY 
programme from any source other than AM.
•  If DAB tuner is connected, Standby Reception 

also works to search for a DAB service.

To select your favorite PTY code for PTY 
Standby Reception,

 see page 24.

The PTY indicator either lights up or flashes.

To activate the PTY Standby Reception

1

Enter the MODE menu (see page 4).

2

3

Select one of the PTY codes.

4

Finish the procedure.

The PTY indicator either lights 
up or flashes.

•  If the PTY indicator lights up, PTY 

Standby Reception is activated.

•  If the PTY indicator flashes, PTY Standby 

Reception is not yet activated.

  To activate PTY Standby Reception, tune 

in to another station providing these 
signals. The PTY indicator will stop 
flashing and remain lit.

To deactivate the PTY Standby Reception,

select “Off” in step 

3

. The PTY indicator goes 

off.