JVC KD-G722 - Инструкция по эксплуатации - Страница 18

18

ENGLISH

You can assign titles to CDs (both in the unit 
and the CD changer). You can assign up to 30 
discs and each title up to 32 characters.
•  You cannot assign a title to a CD Text, an 

MP3/WMA disc, or a USB memory.

1

  Select the sources.

•  For CDs in this unit: Insert a CD.

•  For CDs in the CD changer: Select 

“CD-CH,” then select a disc number.

2

  Enter the title assignment mode.

3

  Assign a title.

1

  Select a character.

2

  Move to the next (or previous) 

character position.

3

  Repeat steps 

1

 and 

2

 until you 

finish entering the title.

4

  Finish the procedure.

To erase the entire title

In step 

2

 on the left...

Available characters

Indications

Selectable settings, [reference page]

TAG DISP

Tag display

TAG ON 

:

[Initial];

 Shows the Tag information while playing MP3/

WMA tracks, [14].

TAG OFF 

:

  Cancels.

AMP GAIN

Amplifier gain control

You can change the maximum volume level of this unit.

LOW PWR  :

  VOL 00 – VOL 30 (Select this if the maximum power of 

the speaker is less than 50 W to prevent them from being 
damaged.)

HIGH PWR  :

[Initial];

 VOL 00 – VOL 50

IF BAND

Intermediate frequency 
filter

AUTO 

:

[Initial];

 Increases the tuner selectivity to reduce 

interference noises between close stations. (Stereo effect 
may be lost.)

WIDE 

:

  Subject to interference noises from adjacent stations, but 

sound quality will not be degraded and the stereo effect 
will remain.

Ex.: When “CD“ is selected as the source

Title assignment