JVC KD-BT22 - Инструкция по эксплуатации - Страница 34

ENGLISH

34

More about this unit

FM RDS operations

•  Network-Tracking Reception requires two types of 

RDS signals—PI (Programme Identification) and AF 
(Alternative Frequency) to work correctly. Without 
receiving these data correctly, Network-Tracking 
Reception will not operate correctly.

•  If a Traffic Announcement is received by TA Standby 

Reception, the volume level automatically changes to 
the preset level (TA Vol) if the current level is lower 
than the preset level.

•  When Alternative Frequency Reception is activated 

(with AF selected), Network-Tracking Reception is 
also activated automatically.

•  TA Standby Reception and PTY Standby Reception 

will be temporarily canceled while listening to an AM 
station.

•  If you want to know more about RDS, visit 

<http://www.rds.org.uk>.

  Disc/USB operations

Caution for DualDisc playback

•  The Non-DVD side of a “DualDisc” does not comply 

with the “Compact Disc Digital Audio” standard. 
Therefore, the use of Non-DVD side of a DualDisc on 
this product may not be recommended.

General

•  This unit has been designed to reproduce 

CDs/CD Texts, and CD-Rs (Recordable)/CD-RWs 
(Rewritable) in audio CD (CD-DA), MP3/WMA/AAC 
formats.

•  When a disc is inserted upside down, “Please Eject” 

appears on the display. Press OPEN, then 

0

 to eject 

the disc.

•  In this manual, words “track” and “file” are 

interchangeably used.

•  While fast-forwarding or reversing on MP3/WMA/

AAC/WAV files, you can only hear intermittent 
sounds.

  Basic operations

Turning on the power

•  By pressing SOURCE on the unit, you can also turn on 

the power. If the source is ready, playback also starts.

Turning off the power

•  If you turn off the power while listening to a track, 

playback will start from where it had been stopped 
previously next time you turn on the power.

General

•  If you change the source while listening to a disc, 

playback stops.

  Next time you select “CD” as the playback source, 

playback will start from where it had been stopped 
previously.

•  After ejecting a disc or removing a USB device, 

“No Disc” or “No USB” appears and you cannot 
operate some of the buttons. Insert another disc, 
reattach a USB device, or press SOURCE to select 
another playback source.

  Tuner operations

Storing stations in memory

•  During SSM search...
  –  All previously stored stations are erased and the 

stations are stored anew.

  –  Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency).

  –  When SSM is over, the station stored in No. 1 will 

be automatically tuned in.

•  When storing a station manually, the previously 

preset station is erased when a new station is stored 
in the same preset number.