JVC KD-BT22 - Инструкция по эксплуатации - Страница 16

ENGLISH

16

Using the Bluetooth ® devices

Bluetooth is a short-range wireless radio 
communication technology for the mobile device such 
as mobile phones, portable PCs, and other devices. The 
Bluetooth devices can be connected without cables and 
communicate with each other.
•  Refer to the list (included in the box) to see the 

countries where you may use the Bluetooth® 
function.

Refer also to the instructions supplied with the 
Bluetooth device.

Bluetooth profile

This unit supports the following Bluetooth profiles;
  HFP (Hands-Free Profile) 1.5
  OPP (Object Push Profile) 1.1
  A2DP (Advanced Audio Distribution Profile) 1.2
  AVRCP (Audio/Video Remote Control Profile) 1.3

Features

You can operate Bluetooth devices through the unit as 
follows:
•  Receiving a call
•  Making a call—from phone book, from call history 

(dialed number/received call), by dialing number, by 
preset numbers, by voice command

•  Informing you of the arrival of a text message
•  Play back a Bluetooth audio player

  Connecting a Bluetooth device for 

the first time

Pairing and PIN code

When you connect a Bluetooth device to the unit 
for the first time, make pairing between the unit 
and the device. Pairing allows Bluetooth devices to 
communicate with each other.
To make pairing, you may need to enter the PIN 
(Personal Identification Number) code of your 
Bluetooth device you want to connect.

•  Once the connection is established, it is registered in 

the unit even if you reset the unit. Up to five devices 
can be registered in total.

•  Only one device for Bluetooth phone and one for 

Bluetooth audio can be connected at a time.

•  To use the Bluetooth function, you need to turn on 

Bluetooth function of the device.

Preparation:

 Operate the device to turn on its 

Bluetooth function.
•  When 

 is shown on the display, you can 

move back to the previous screen by pressing number 
button 3.

1

  While listening to a source...

2

  Select “Device.”

3

  Select “New Pairing.”