JVC KD-BT22 - Инструкция по эксплуатации - Страница 17

ENGLISH

17

OPERATIONS

Continued on the next page

4

  Enter a PIN (Personal Identification Number) 

code to the unit.

•  You can enter any number you like (1-digit to 

16-digit number). [Initial: 0000]

    •  To enter a PIN code less than 4-digit, firstly 

delete the initial PIN code (0000) by pressing 
number button 5 ( 

 ).

* 

Some devices have their own PIN code. Enter the 
specified PIN code to the unit.

1

  Move to the next (or previous) number 

position.

2

  Select a number.

3

  Repeat steps 

1

 and 

2

 until you finish 

entering a PIN code.

4

  Confirm the entry.

5

  Operate the target Bluetooth device, (while 

“Open...” is flashing on the display).

On the device to be connected, enter the same PIN 
code you have just entered for this unit.

“Connecting...” flashes, then “Pairing Ok” or 
“Connected [Device Name]” appears on the display 
when the connection is established. Now you can 
use the device through the unit.

 appears when the connection is established.

The device remains registered even after you 
disconnect the device. Use “

Cnnct Phone

” or 

“

Cnnct Audio

” (or activate “

Auto Cnnct

”) to 

connect the same device from next time on. (See 
the following and pages 32 and 33.)

Deleting a registered device

Perform steps 

1

 and 

2

 on page 16, then...

1

Select “Del Pairing.”

2

Select a device you want to delete.

3

Delete the selection.

•  Press number button 3 to select “No” or return to 

step 

1

.

Connecting a registered device

Perform steps 

1

 and 

2

 on page 16, then...

1

Select “Cnnct Phone” or “Cnnct Audio.”

2

Select a device you want.

“Connecting...” flashes, then “Connected (and 
device name)” appears on the display when the 
device is connected.