JVC KD-AVX11 - Инструкция по эксплуатации - Страница 56

ENGLISH

56

Symptoms

Remedies/Causes

MP3/WMA/WAV playback

•  Disc cannot be played back.

•  Change the disc.
•  Record the tracks using a compliant application in the 

appropriate discs. (

☞

 page 4)

•  Add  appropriate extension codes to the file names.

•  Noise is generated.

The track played back is not a playable file format. Skip to 
another file.

•  Tracks are not played back as you have 

intended them to play.

Playback order may differs from the one played back using 
other players.

•  Elapsed playing time is not correct.

This sometimes occurs during playback. This is caused by 
how the tracks are recorded.

Bluetooth

*

•  Bluetooth device does not detect the unit.

This unit can be connected with one Bluetooth cellular 
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected 
from another device. Disconnect currently connected device 
and search again.

•  The unit does not detect the Bluetooth 

device.

•  Check the Bluetooth setting of the device.
•  Search from the Bluetooth device. After the device 

detects the unit, select <

Open

> on the unit to connect 

the device. (

☞

 page 24)

•  The unit does not make pairing with the 

Bluetooth device.

•  Enter the same PIN code for both the unit and target 

device. If the PIN code of the device is not indicated on its 
instructions, try “0000” or “1234.”

•  Select the device name from <

Special Device

>, then 

try to connect again. (

☞

 page 25, 47)

•  Echo or noise occurs.

Adjust the position of the microphone unit.

•  Phone sound quality is poor.

Move the car to place where you can get a better signal 
reception.

•  The sound is interrupted or skipped during 

playback of a Bluetooth audio device.

•  Place the Bluetooth audio device nearer to the adapter.
•  Disconnect the device connected for “Bluetooth phone.”
•  Turn off, then turn on the unit. 
•  (When the sound is not yet restored,) connect the device 

again.

•  The connected audio device cannot be 

controlled.

Check whether the connected audio device supports AVRCP 
(Audio Video Remote Control Profile).

*

For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.