JVC KD-AVX11 - Инструкция по эксплуатации - Страница 53

53

REFERENCES

ENGLISH

  Sound signals emitted through the rear terminals

Through the analog terminals (Speaker out/LINE OUT)

2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
•  DTS sound cannot be reproduced.

Through the DIGITAL OUT terminal

Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted.
•  To reproduce the multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a 

decoder compatible with these multi-channel sources to this terminal, and set <

D. Audio Output

> correctly. 

(

☞

 page 42)

D. Audio Output

Playback disc

Output signals

Stream

Dolby Digital

PCM Only

DVD

48 kHz, 16/20/24 bits Linear PCM

48 kHz, 16 bits stereo Linear PCM

*

96 kHz, Linear PCM

48 kHz, 16 bits stereo Linear PCM

with 

Dolby Digital

Dolby Digital bitstream

48 kHz, 16 bits stereo 

Linear PCM

with 

DTS

DTS bitstream

with 

MPEG Audio

MPEG bitstream

48 kHz, 16 bits stereo Linear PCM

Audio CD

, 

Video CD

44.1 kHz, 16 bits stereo Linear PCM /

48 kHz, 16 bits stereo Linear PCM

Audio CD

 with 

DTS

DTS bitstream

48 kHz, 16 bits stereo Linear PCM

DivX

with 

Dolby Digital

Dolby Digital bitstream

48 kHz, 16 bits stereo 

Linear PCM

with 

MPEG Audio

32/44.1/48 kHz, 16 bits Linear PCM

MPEG1/MPEG2

44.1/48 kHz, 16 bits Linear PCM

MP3/WMA

32/44.1/48 kHz, 16 bits Linear PCM

WAV

44.1 kHz, 16 bits stereo Linear PCM

*

  Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the 

discs are not copy-protected.

  Characters shown on the monitor

In addition to the roman alphabet (A – Z, a – z), the following characters will be used to show the various 
information on the monitor.
•  You can also use the following characters to assign titles. (

☞

 page 38).

Upper and lower cases

Numbers and symbols