JVC KD-AVX11 - Инструкция по эксплуатации - Страница 45

SETTINGS

45

ENGLISH

Equalizer

Menu items

Selectable settings, [reference page]

Flat/Hard Rock/R&B/Pop/Jazz/
Dance/Country/Reggae/Classic/
User1/User2/User3

☞

 [37]

Sound

Menu items

Selectable settings, [reference page]

Fader/Balance

Adjust fader—speaker output balance between the front and rear 
speakers.
• Upmost—front only
• Downmost—rear only
When using a two-speaker system, set the fader to the center (

00

).

Adjust balance—speaker output balance between the left and right 
speakers.
• Leftmost—left only
• Rightmost—right only

Volume Adjust

Adjust and store auto-adjustment volume level for each source, 
comparing to the FM volume level. The volume level will automatically 
increase or decrease when you change the source.

–12

 to 

+12

; Initial 

00

Subwoofer

Adjust the settings below in the submenu:

Phase

 : Subwoofer phase. Select either <

Normal

> or <

Reverse

>, 

which reproduces a better sound.

Level

: Subwoofer output level. Level: 

–06

 to 

+08

; Initial 

00

High Pass Filter

Through

 : Select when the subwoofer is not connected.

On

 : Select when the subwoofer is connected.

Crossover

Adjust the crossover frequency between the front/rear speakers and the 
subwoofer.

80Hz

, 

120Hz

, 

150Hz

Amplifier Gain

You can change the maximum volume level of this unit.

Off

 : Deactivates the built-in amplifier.

Low Power

 : VOL 00 to 30 (Select this if the maximum power of the 

speakers is less than 50 W)

High Power

 : VOL 00 to 50

Adjusts fader

Adjust balance