JVC KD-AV7001 - Инструкция по эксплуатации - Страница 80

80

ENGLISH

Center holder

How to clean the monitor

When removing stains or dust on the surface,
turn off the monitor, then wipe with dry soft
cloth.
• Be careful not to scratch the surface when

wiping it.

• Do not use the following materials to clean

the monitor:
– Wet cloth
– Volatile substance such as benzine and

thinner

– Acid detergent, alkaline detergent, and

detergent composed of organic substance

• When using chemically processed duster, read

its precautions carefully.

How to clean the connectors

Frequent detachment of the monitor will
deteriorate the connectors.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
• Attach the blind cover to the main unit

whenever the monitor is removed to protect
the internal mechanism from dust.

Moisture condensation

Moisture may condense on the lens inside the
disc player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the disc player may
malfunction. In this case, eject the disc and
leave the unit turned on for a few hours until the
moisture evaporates.

Maintenance

How to handle discs

When removing a disc from
its case, press down the center
holder of the case and lift the
disc out, holding it by the
edges.
• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after

use.

To keep discs clean

A dirty disc may not play
correctly.
If a disc does become dirty, wipe
it with a soft cloth in a straight
line from center to edge.
• Do not use any solvent (for example,

conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.

To play new discs

New discs may have some rough spots around
the inner and outer edges. If
such a disc is used, this unit
may reject the disc.
To remove these rough spots,
rub the edges with a pencil or
ball-point pen, etc.