Hyundai Electronics H-CMMD4049 - Инструкция по эксплуатации - Страница 15

15

Operation

Band selection

Press BAND/TITLE button on the RC or 

BND/  button on the panel to switch to the 
bands in the following order: FM1 - FM2 - FM3 
– FM4 (OIRT) - AM1 - AM2.

Manual/automatic tuning

•  Manual tuning: Press 

/

 buttons on 

the RC repeatedly to change the frequency 
upward or downward step by step.

•  Automatic tuning: Press and hold 

/

buttons on the RC to start automatic seeking for 
an available radio station downward or upward. 
After being found the station will be played.

Local/distant selector

In radio mode, press LOC/SUB-T button 

on the RC to select strong or weak station 
reception. LOC appears on the display and only 
local stations are available. When you turn it off 
both distant and local stations can be received.

  The function is invalid in AM bands.

Selecting stored station

In radio mode, press 

/

 buttons on 

the RC to select the stored station upward/
downward.

Mono/Stereo selector

In radio mode, you can press ST/AUDIO 

button on the RC to select mono or stereo 
mode. Stereo reception is on when MONO 
disappears on the display. It is switched to 
mono mode when MONO appears. When the 
received stereo signal is weak, switch to mono 
mode to improve the signal.

 The function is available only in FM bands.

Scanning/memorizing stations 

automatically

In radio mode, you can press AMS/MENU 

button on the RC or AMS button on the monitor 
to scan for several seconds each station 
stored in number positions. You can press the 
corresponding number buttons, AMS/MENU 
button on the RC or AMS button on the monitor 

when your desired station is on. And it starts 
playing that station.

Press and hold AMS/MENU button on 

the RC or AMS button on the monitor; it will 
activate automatic storing function. The tuner 
automatically selects a station and stores it in 
number positions.

To store a station manually, touch SAVE 

button when listening.

Goto FREQ

Press GOTO button, and the monitor shows 

FREQ. Then press number buttons to input the 
needed frequency. The unit will go to the input 
frequency.

  This function is only available when 

GOTO FREQ is set to ON in System 
adjustment menu.

RDS background

RDS service availability varies with areas. 

Please understand if RDS service is not 
available in you area, the following service is 
not available.

RDS touchable user interface

In Radio interface, touch RDS button; 

following menu will be displayed:

1 2

3

4

5

6

1. ТА button. Touch it to set TA function on/off.
2. AF button. Touch it to set AF function on/off.
3. PTY information window.
4. PTY. Touch it to set PTY function on or off.