Hyundai Electronics H-CMMD4049 - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

General operations

Touch screen

Due to the touch screen, you can fulfill most 

functions not only by pressing buttons but also 
by touching the options you need.

Reset the unit

Operating the unit for the first time or after 

replacing the car battery, you must reset the 
unit. Press RES button on the unit with a 
pointed object (such as a ballpoint pen) to set 
the unit to initial state.

  When some errors occur on the display, 

you can also press RES button to resume to 
normal, and it will erase the clock setting and 
some memorized functions.

Turning the unit on/off

Press PWR/SOURCE button on the RC or 

PWR/SRC button on the panel to turn on the 
unit. Press and hold the button more than 2 
seconds to turn off the unit.

Open the monitor

Press OPEN button on the unit to open the 

monitor. Press the button again, the monitor 
returns to the previous state.

Angle setting

You can adjust the desired angle of the 

monitor. Press ANGLE   and ANGLE   
buttons to adjust monitor backward or forward 
by definite angle.

  Please do not adjust the monitor tilt 

manually, otherwise it can get damaged.

Volume control

Press VOL+/VOL- buttons on the RC or 

rotate VOL regulator on the unit to increase/
decrease the sound level.

Setting the sound characteristics

Repeatedly press SEL button on the RC or 

on the unit to select the desired parameter in the 
following order: VOLUME => BALANCE => FAD 

=> BASS => TREBLE => SUBWOOFER. After 
selecting the desired parameter, you can adjust 
its current level by pressing VOL+/- buttons on 
the RC or rotating VOL knob on the unit.

Mute function

Press   button on the RC or MUTE/NAV 

button on the unit to turn off the sound. Press 
the button again or adjust volume to resume 
the sound output.

Equalizer setting

While listening to music, you can select the 

corresponding preset modes to adjust the sound 
quality perfectly by using AF/EQ button on the 
RC. Press and hold the button repeatedly to 
choose the following modes in turn: POP => 
CLASS => ROCK => Off (no equalizer).

Loudness

Press and hold TA/LOUD button on the RC or 

TA/LOU button on the panel to activate loudness 
function. This is to increase the low frequency, 
which can improve sensitivity for your ears. 
Keep pressing it again to quit this function.

Mode selection

•  Repeatedly press PWR/SOURCE button 

on the RC or PWR/SRC button on the unit to 
select a mode: Radio => TV => NAVI (option) 
=> SETUP => BT (not supported) => AUX => 
IPOD (not supported) => DVD.

•  In any mode touch   item on the screen 

to display the Main menu. In the menu, touch 
the item of the mode you need to select the 
corresponding mode.

•  In any mode touch the screen on any non-

functional area, then slide the page aside (both 
up/down and rightwards/leftwards) to go to the 
interface of the previous or next mode.

  The DVD mode is only available when 

a disc, USB or SD/MMC card is inserted into 
the unit.

GPS navigation (option)

NAVI mode is optional and it is available only