Hyundai Electronics H-CMD4030 - Инструкция по эксплуатации - Страница 13

12

13

Operation

Operation

When TA function is activated, it will search 

the station with TA information automatically. 
If there is no TA information, it will search the 
station with TP information automatically, if 
there is no TP information either, it will return to 
the previous station after searching.

When receiving the station with TP 

information but without TA information, 
TP icon is on and TA icon keeps blinking; 
when receiving the station with TP and TA 
information, both TP and TA icons are on.

When playing in other mode and TA 

information is received, it will change to the 
radio mode automatically. After playing over, it 
will return to the previous mode. Press AF/TA 
button on the RC once to ignore the received TA 
information, do it twice to turn off the function.

PTY (Program type) function

Press PTYMDC button on the RC to open 

PTY program type list, and repeat pressing 
PTY/MDC button to select a PTY type. After 
selecting the program type you want, press 
number buttons 1 - 6 on the RC to start search. 
Press it again to stop the PTY search. If PTY 
code is different or not available, “PTY NONE” 
blinks on the display.

Other functions

For additional options, such as TA Volume, 

Retune, EON TA, Region, Mask, please see 
“Radio page“ of “System Setup“ chapter.

TV tuner operations

•  Connect a TV antenna to the TV antenna 

jack of the unit. Select TV mode.

•  To access the TV mode menu, press and 

hold MENU button on front panel or press 

button on the RC. To select a menu page (Auto 
Program or Manual Program) press UP/DOWN 
cursor buttons on the RC or rotate VOLUME 
knob on the panel. To enter the selected page 
press ENTER button on the RC or OK button 
on the panel. Press UP/DOWN cursor buttons 

on the RC or rotate VOLUME knob on the 
panel to select an item, and then press ENTER 
button on the RC or OK button on the panel to 
adjust the setting. Press 

 button on the RC 

to return to last settings list.

AUTO PROGRAM
•  System: select TV system (SECAM/PAL).
•  Audio: select sound system (DK/BG/I).
•  Search: select to start automatical search 

and storing of TV channels.

MANUAL PROGRAM
•  Storage: select the storage number of the 

channel.

•  System: select TV system (SECAM/PAL).
•  Audio: select sound system (DK/BG/I).
•  Channel: Select the number of the 

channel. You can also press number buttons on 
the RC to select the channel number; or press 
SEEK- 

 or SEEK+ 

 buttons on the panel 

or RC to go to previous or next saved channel.

•  Fine: perform fine tuning of picture quality.
•  Memory: select on (memorize the found 

channel) or off (not memorize).

Disc/USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 2.0. Capacity: up to 8 

Gb.

For correct and satisfactory operation, 

licensed SD/MMC memory cards of famous 
brands should be used with this unit. Avoid 
using memory cards of unknown brands. 
Capacity: up to 8 Gb.

Insert/Eject disc

•  Open the front panel. Press EJECT button 

and insert a disc into the disc slot with label 
side up. The disc will be automatically loaded 
into the unit. Close the front panel.

•  Open the front panel and press EJECT 

button to eject the disc from the slot. If the disc 
is not removed from the slot within several 
seconds, it will be automatically loaded into 
the slot again. When the disc is ejected and