Hyundai Electronics H-CDM8071 - Инструкция по эксплуатации - Страница 9

8

9

Operation

Operation

General operations

Turning on/off

Press PWR/MUTE button to turn on the unit.

Press and hold PWR/MUTE button to switch 
the unit off. 

  After the unit is off, the volume level 

and radio current settings will be memorized, 
and when you turn the unit on it will resume 
the stored status you previously set. To protect 
your ear from too loud sound, the unit volume 
level will turn to 20 automatically when you 
turn the unit on if currect volume level setting is 
above 20 when your turn the unit off.

Volume control

Rotate VOLUME knob to adjust the volume 

level.

Mute function

Press PWR/MUTE button to turn the sound 

off. Press it again to turn the sound on.

Audio parameter setting

Press repeatedly SEL button to select the 

audio settings: BAS (Bass) => TRE (Treble) 
=> BAL (Balance) => FAD (Fader). Rotate 
VOLUME knob to adjust each setting.

  If the unit is turned off, all the settings of 

each mode will be saved. If cutting off battery 
power or resetting the unit, all the settings 
will return to factory default settings. If you 
don’t adjust the setting within several seconds 
after selecting the desired setting, the unit will 
automatically return to the current mode being 
displayed.

Setting other features

Press and hold SEL button on the panel, 

and then shortly press this button repeatedly to 
select a setting. Rotate VOLUME knob on the 
panel to adjust each setting.

INVOL: Set default volume level when the 

unit is turned on.

ADJ: you can set the clock. Rotate VOLUME 

knob clockwise to set minutes; rotate VOLUME 

knob counterclockwise to set hours.

24 HOUR: choose 24 hour clock display 

mode or 12 hour clock display mode.

LOUD ON/OFF: Enable LOUD ON (Default 

is LOUD OFF).

BEEP ON/OFF: if BEEP on, pressing any 

key will make a beep sound.

Equalizer (DSP) setting

Press DSP button repeatedly to choose 

intended sound effect in the sequence: POP 
=> ROCK => CLAS => FLAT => NONE.

Mode setting

Press MODE button to select between unit 

operation modes: TUNER => CD => SD => 
USB => AUX.

  CD, SD, USB modes will only show on 

the display when a USB device, memory card 
or a disc is inserted into the unit.

AUX jack

AUX-in jack is intended for connecting an 

external audio or video equipment to amplify 
the sound. If connection is made correctly, the 
audio signal from the external source will be 
translated through the acoustics of the head 
unit. This enables to adjust the volume and 
quality of the sounding. For example, you can 
connect an MP3-player to listen to tracks using 
the car acoustic system.

Radio operations

Band selection

Press repeatedly BAND button to select your 

desired radio band during RADIO mode: FM1, 
FM2, FM3 (OIRT), AM1 (MW1), AM2 (MW2). 
In each set of the bands you can store up to 6 
preset stations, making total 30 preset memory 
stations.

Automatic tuning

To find a station, select a band first, then 

press and hold 

/

 buttons, the automatic