Hyundai Electronics H-CDM8071 - Инструкция по эксплуатации - Страница 11

11

Operation

When REG is disabled (off), the receiver 

ignores regional variants.

Mono/Stereo control 

(

in FM radio mode

)

Press and hold SEL button, then press it 

repeatedly until the display shows STEREO 
(MONO). Turn VOLUME knob to switch 
between ON (stereo reception) or OFF (mono 
reception). Improvement of reception of distant 
stations can be done by selecting mono mode, 
which may cut down some reception noise.

Local radio station search

Press and hold SEL button, then press it 

repeatedly until the display shows LOCAL 
(DISTANT). When the LOCAL function is on, the 
local stations (stations with weak radio signal) 
can be played. When the DISTANT function is 
on, both local and distant stations (stations with 
strong radio signal) can be played.

Setting other features

Press and hold SEL button, then press it 

repeatedly until the display shows one of these 
settings: TA VOL => EON. Rotate VOLUME 
knob to adjust each setting, and press SEL 
button to confirm the adjustment. 

TA VOL: Adjust the volume for TA 

announcement.

EON: Choose EON ON/OFF. The default 

setting is ON.

Disc/USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 2.0. Capacity: up to 8 

Gb.

For correct and satisfactory operation, 

licensed SD/MMC memory cards of famous 
brands should be used with this unit. Avoid using 
memory cards of unknown brands. Capacity: up 
to 8 Gb.

Loading/Ejecting a disc

Open the front panel and insert a disc into 

the disc slot with label side up. The disc will be 
automatically loaded into the unit. The first file 
in the root folder will be played.

Open the front panel and press EJECT 

button to eject the disc from the slot. If the disc 
is not removed from the slot within several 
seconds, it will be automatically loaded into 
the slot again. When the disc is ejected and 
removed, the unit will automatically switch to 
another mode.

Inserting the SD/MMC/USB device

Open the front panel and insert an SD/

MMC memory card into the card slot. Open the 
USB slot cover on the front panel and insert a 
USB into the USB slot. Then the playing mode 
will be changed into MMC/SD or USB mode 
automatically. The first card/USB device track 
playback will start.

  When SD/MMC card and USB device are 

both inserted, the playing mode will be changed 
into the mode of the device inserted later. 

Stopping playback

The unit will automatically play from the first 

sound track recorded on a disc/SD/MMC /USB 
device. To ensure good system performance, 
wait until the unit finishes reading the disc/
device information before proceeding. To stop 
playback, press MODE button and select a 
different mode. When you go back to disc/
USB/card playback mode, the playback will 
continue from the point it was stopped on.

Play/pause

During playback press MEM/

 button to 

pause playback. Press this button again to 
resume playback.

Playing the previous/next track

During playback press 

 button to play the 

previous track. Press 

 button to play the 

next track.

Fast forward/rewind

Press and hold 

/

 buttons to select