Hyundai Electronics H-CDM8071 - Инструкция по эксплуатации - Страница 10

10

Operation

you do not have to retune the stations when 
driving between different transmitter coverage 
areas. When AF symbol is on, it means RDS 
information is received; when AF symbol is 
flashing, it means RDS information is not yet 
received. If RDS service is not available in your 
area, turn off the AF mode.

TA (Travel Announcement) / TP 

(Travel Program Identification)

Enable or disable TA mode by pressing and 

holding BAND button. Default setting is OFF. 

When TA function is activated, it will search 

the station with TA information automatically. 
If there is no TA information, it will search the 
station with TP information automatically, if 
there is no TP information either, it will return to 
the previous station after searching.

When receiving the station with TP 

information but without TA information, TP 
icon is on and TA icon keeps blinking; when 
receiving the station with TP and TA information, 
both TP and TA icons are on. When playing in 
other mode and TA information is received, it will 
change to the radio mode automatically. After 
playing over, it will return to the previous mode.

PTY (Program Type) 

(for FM radio)

Press and hold SEL button, then press it 

repeatedly to select PTY. Press and hold DISP 
to enter PTY program type selection and rotate 
VOLUME regulator to select a PTY type. After 
selecting the program type you want, press 
MEM/

 button to search for corrsponding 

program. Press the button again to stop the 
PTY search. If PTY code is different or not 
available, then display blinks with “PTY NONE”.

REG (Regional) function

Press and hold SEL button, then press it 

repeatedly to select REG, then rotate VOLUME 
knob to set this function on/off. Default setting 
is off for REG.

When REG is enabled (on), the receiver 

accepts regional variants of the tuned station 
with REG icon turned on.

downward/upward search will start. It will play 
when a station is found.

Programming preset stations

•  To store a station: Select a band (if needed); 

find a station by automatic tuning. Then press 
MEM/

 button and rotate VOLUME knob to 

choose a memory position (1-6), and finally 
press MEM/

 button to confirm.

•  To recall a station: press repeatedly 

/

 buttons until the needed station is found.

Auto memory store

Select a band, press and hold AS/PS 

button to enter auto store mode. The radio will 
automatically store 6 stations to the 6 preset 
memories of the current band. To stop auto 
store, press this button again.

  During auto station preset, the unit will 

search and store stations with the strong signal 
first, and then weaker signal stations until the 
memories are full.

Preset scan

Select a band, press AS/PS button to scan 

all preset stations in the memories of the 
current band, each preset scan for 5 seconds. 
To stop preset scan, press the button again.

RDS function

RDS (Radio Data System) service availability 

varies with areas. Please understand if RDS 
service is not available in you area, the following 
service is not available, either.

AF (Alternative Frequencies) 

function

Press and hold SEL button to select AF. 

Rotate VOLUME knob to set this function on/
off. If the AF function is on, the display will 
show “AF”.

When the radio signal strength is poor, 

enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength, so that