Hyundai Electronics H-CDM8028 - Инструкция по эксплуатации - Страница 18

18

13 cm 2-way coaxial acoustic system

any metal objects (e.g. coins or metal tools) 
inside the acoustic system.

•   Make absolutely sure that the terminals 

for the speakers are connected to the proper 
outputs from the music source.

•   Never run the wiring on the outside of the 

vehicle or under it where it can be damaged 
by road hazards or the moving parts of the 
vehicle. Use existing wire channels, sills, 
panels and molding strips inside the vehicle to 
hide the wiring for safety and a neat appliance.

•   Make sure the wire of the negative pole 

terminal is disconnected from accumulator 
while connecting the speaker terminals. 
Turn on the various components and slowly 
advance the volume. Remember to check 
and re-check all connections to insure proper 
installation and use.

•   Do not continuously use the speaker 

system beyond the nominal power handling 
capacity.

•   Keep recorded tapes, watches, and 

personal credit cards using magnetic coding 
away from the speaker system to protect them 
from damage caused by the magnets in the 
speakers.

•   If you cannot find the appropriate 

mounting location, consult your car dealer or 
your nearest dealer before mounting.

 Take extreme caution when working 

near the gas tank, gas lines, brake or hydraulic 
lines and electrical wiring.

Installation of the speaker

Installation kits are available from your 

dealer or local stereo shop to help make your 
installation easy. These kits also give your 
installation a clean, custom appearance. 
Questions about installations methods please 
consult a professional auto sound dealer/
installer for assistance.

•   Choose the place of installation for 

acoustic system. For most acoustic system 
stipulated regular places in the automobile 

approach. In this case you need to know only 
assembly depth. Before installation acoustic 
system check up their assembly depth.

•   At a choice of a non-standard 

arrangement of speakers at which it is 
necessary to cut them in panels of the 
automobile, use a mould (not included). For 
achievement of ideal arrangement of acoustic 
system keep up geometry of a mould, as it is 
very important for correct installation of your 
system (А=В=115 mm,  С=5 mm).