Hyundai Electronics H-CDM8028 - Инструкция по эксплуатации - Страница 11

11

Operation

under which you can store and recall stations 
for each band. Select the needed station, 
then press and hold a preset button. The 
station will be saved in the memory under 
the corresponding number. To recall a stored 
station, press the corresponding preset button.

Automatic store/preset scan

Automatic store
Press and hold F/PS button. The radio will 

automatically store the 6 strongest available 
stations to the 6 preset memories of the 3 FM 
bands or the 2 AM bands (depending on which 
one is current). To stop auto store, press this 
button again.

Preset scan
Press F/PS button, the receiver will scan the 

saved stations in the current band.

Mono/Stereo control 

(in FM radio 

mode)

Press SEL button until the display shows ST 

ON (ST OFF). Turn VOLUME knob to switch 
between ON (stereo reception) or OFF (mono 
reception).

Improvement of reception of distant stations 

can be done by selecting mono mode, which 
may cut down some reception noise.

RDS function

RDS (Radio Data System) service availability 

varies with areas. Please understand if RDS 
service is not available in you area, the following 
service is not available, either.

AF (alternative frequencies) function

Press AF button to turn the AF function on 

or off.

When the radio signal strength is poor, 

enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength, so that 
you do not have to retune the stations when 
driving between different transmitter coverage 
areas. When AF symbol is on, it means RDS 

information is received; when AF symbol is 
flashing, it means RDS information is not yet 
received.

PS (Program Service name): the name of 

station will be display instead of frequency.

If RDS service is not available in your area, 

turn off the AF mode. Default setting is ON.

TA (Traffic Alarm) function

Press TA button to turn TA function on or off.
In TA mode traffic program will be 

automatically searched, until the program 
is received. When traffic announcement is 
received the unit will temporarily switch to the 
tuner mode (regardless of the current mode) 
and begin broadcasting the announcement. 
After the traffic announcement is over, it will 
return to the previous mode and volume level. 
To interrupt traffic announcement press TA 
button shortly; it will not switch off the TA mode.

PTY (Program Type)

This radio will allow you to select the type of 

program required, and will search for a station 
broadcasting that type of program. 

Press PTY/CLK button to show the music 

type. Then press 1 - 6 number buttons to 
choose different music programs available.

Press PTY/CLK button twice to show the 

speech type program. Then press 1 - 6 number 
buttons to choose different speech programs. 
Each number button will show 3 different 
speech programs for you to choose (see table 
below).

Button

Music group

Speech group

1

Pop, Rock

News, Affairs, 

Info

2

Easy, Light

Sport, Educate, 

Drama

3

Classics, 

Other

Culture, Science, 

Varied

4

Jazz, Country

Weather, 

Finance, Children