Hyundai Electronics H-CCR8085 - Инструкция по эксплуатации - Страница 9

8

9

Operation

Operation

General operations

Turning the unit on/off

Press PWR button to turn the unit on. Press 

the button again to turn the unit off.

Mode select

Press MOD/MUT button repeatedly to 

select between Radio, auxiliary input, USB or 
Memory Card modes. Modes of operation are 
indicated on the display. Memory card and 
USB modes are not available unless a memory 
card or USB device is connected.

Volume control

Adjust volume by rotating VOLUME knob 

(00-42).

Mute function

Press and hold MOD/MUT button to switch 

off the sound; press it again or rotate VOLUME 
knob to resume the sound.

Loudness

Press SELECT button repeatedly until LOUD 

ON (OFF) is displayed. Rotate VOLUME knob 
to select loudness ON or OFF. Activating this 
feature will enhance bass and treble frequencies 
when listening to music at low volumes.

Audio parameter setting

Press SELECT button repeatedly to select 

a parameter: VOL (volume) => BAS (bass) => 
TRE (treble) => BAL (balance) => FAD (fader). 
Rotate VOLUME knob to adjust each mode:

•  Bass/Treble: from -10 to 10;
•  Balance: L10 (left) to R10 (right);
•  Fader: from R10 (rear) to F10 (front).

  When DSP is on, bass and treble are 

not adjustable.

Preset EQ modes

Press SELECT button repeatedly until EQ 

OFF is displayed. Rotate VOLUME knob to 
select between FLAT/CLASS/ROCK/POP and 
OFF equalizer modes.

Beep function

Press SELECT button repeatedly until BEEP 

ON (OFF) is displayed. Rotate VOLUME knob 
to select between ON (beep sound is heard 
when a button is pressed) and OFF (no sound 
is heard when a button is pressed).

Clock

Press and hold PTY/CLK button to display 

the time on the screen. Then press and hold 
this button again; the time indication will 
blink. Press 

 button to adjust hours; press 

 button to adjust minutes. To confirm the 

adjustment, press PTY/CLK button or leave the 
unit idle for several seconds.

Preset volume

Press and hold SELECT button, then press 

it until P-VOL is displayed. Rotate VOLUME 
regulator to adjust the preset volume level. 
This volume level will be active each time you 
switch on the unit.

Aux In

AUX-in jack is intended for connecting 

an external audio equipment to amplify the 
sound. If connection is made correctly, the 
audio signal from the external source will be 
translated through the acoustics of the head 
unit. This enables to adjust the volume and 
quality of the sounding. For example, you can 
connect an MP3-player to listen to tracks using 
the car acoustic system.

Radio operations

Band select

In Radio mode press BND/ID3 button to 

select a radio band: FM1, FM2, FM3 and AM1, 
AM2. 6 stations can be saved in each band.

Manual/automatical tuning

•  Press and hold 

/

 buttons to display 

MANUAL. Now you can press these buttons 
repeatedly to adjust the needed frequency