Hyundai Electronics H-CCR8085 - Инструкция по эксплуатации - Страница 10

10

Operation

manually.

•  To adjust the needed frequency 

automatically, press 

/

 buttons. The 

radio will seek to the next down or up strong 
and clear frequency station. Repeat this action 
to seek for other desired stations.

Storing and recalling stations

To store a station
To store a station, select the desired band 

and station. Press and hold the desired 
number button for more than 2 seconds. When 
stored, the preset number will appear on the 
display. The station can be recalled anytime by 
pressing the corresponding number button.

Store stations automatically
•  Press and hold F/PS button for more than 

2 seconds to automatically find and store 6 
strongest stations in the current band.

•  After the 6 strongest stations are saved, 

press F/PS button; scanning of all stored 
station will begin.

Mono/Stereo control 

(in FM radio mode)

Press SELECT button repeatedly until 

the display shows STEREO (MONO). Turn 
VOLUME knob to switch between stereo 
reception or mono reception.

Improvement of reception of distant stations 

can be done by selecting mono mode, which 
may cut down some reception noise.

RDS function

RDS (Radio Data System) service availability 

varies with areas. Please understand if RDS 
service is not available in you area, the 
following service is not available, either.

AF (Alternative Frequencies) 

function

Press AF button on the panel to turn the AF 

function on or off.

When the radio signal strength is poor, 

enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 

station but with a stronger signal, so that 
you do not have to retune the stations when 
driving between different transmitter coverage 
areas. When AF symbol is on, it means RDS 
information is received; when AF symbol is 
flashing, it means RDS information is not yet 
received.

PS (Program Service name): the name of 

station will be display instead of frequency.

If RDS service is not available in your area, 

turn off the AF mode. Default setting is ON.

TA (Traffic Alarm) function

Press TA button to turn TA function on or off.
In TA mode traffic program will be 

automatically searched, until the program 
is received. When traffic announcement is 
received the unit will temporarily switch to the 
tuner mode (regardless of the current mode) and 
begin broadcasting the announcement. After the 
traffic announcement is over, it will return to the 
previous mode and volume level. To interrupt 
traffic announcement press TA button shortly; it 
will not switch off the TA mode.

PTY (Program Type)

This radio will allow you to select the type of 

program required, and will search for a station 
broadcasting that type of program. 

Press PTY/CLK button to show the music 

type. Then press 1 - 6 number buttons to 
choose different music programs available.

Press PTY/CLK button twice to show the 

speech type. Then press 1 - 6 number buttons 
to choose different speech programs. Each 
number button will show 3 different speech 
programs for you to choose (see table below).

Button

Music group

Speech group

1

Pop, Rock

News, Affairs, 
Info

2

Easy, Light

Sport, Educate, 
Drama

3

Classics

Culture, Science, 
Varied