Skil 0750 - Инструкция по эксплуатации - Страница 8

8

b) 

Do not use the power tool if the switch does not turn 

it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c) 

Disconnect the plug from the power source and/or 

the battery pack from the power tool before making 

any adjustments, changing accessories, or storing 

power tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

d) 

Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained 

users.

e) 

Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s 

operation. If damaged, have the power tool repaired 

before use.

 Many accidents are caused by poorly 

maintained power tools.

f) 

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control.

g) 

Use the power tool, accessories and tool bits etc., in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations different 

from those intended could result in a hazardous situation.

5) BATTerY Tool Use ANd CAre

a) 

Recharge only with the charger specified by the 

manufacturer.

 A charger that is suitable for one type of 

battery pack may create a risk of fire when used with 

another battery pack.

b) 

Use power tools only with specifically designated 

battery packs.

 Use of any other battery packs may 

create a risk of injury and fire.

c) 

When battery pack is not in use, keep it away from 

other metal objects like paper clips, coins, keys, 

nails, screws, or other small metal objects that can 

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns 

or a fire.

d) 

Under abusive conditions, liquid may be ejected 

from the battery; avoid contact. If contact 

accidentally occurs, flush with water. If liquid 

contacts eyes, additionally seek medical help.

 Liquid 

ejected from the battery may cause irritation or burns.

6) serVICe

a) 

Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 This 

will ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY INSTRUCTIONS FOR CORDLESS 

sHrUB/GrAss sHeArs

GeNerAl

•  This tool is not intended for use by persons (including 

children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction 

concerning use of the tool by a person responsible for 

their safety

•  Ensure that children do not play with the tool

•  Only use the tool in daylight or with appropriate artificial 

lighting

•  Always remove battery from tool

-  whenever leaving the tool unattended

-  before clearing jammed material

-  before checking, cleaning or working on the tool

-  after striking a foreign object

-  whenever the tool starts vibrating abnormally

•  Do not trim hedges when they are wet

•  Keep hands and feet away from the cutting blade, 

especially when switching on the tool

•  Never operate the tool in the direct vicinity of persons 

(especially children) and animals

•  The user is responsible for accidents or hazards 

occurring to other people or their property

BeFore Use

•  Before using the tool for the first time, it is recommended 

to receive practical information

•  Always check that the supply voltage is the same as the 

voltage indicated on the nameplate of the charger

•  Check the functioning of the tool before each use and, in 

case of a defect, have it repaired immediately by a 

qualified person; never open the tool yourself

•  Before use, thoroughly inspect the cutting area and 

remove all foreign objects that could be entangled in the 

cutting blades (such as stones, nails, wire fences, metal 

plant supports)

dUrING Use

•  Wear protective gloves, safety glasses, close-fitting 

clothes and hair protection (for long hair)

•  Always wear long trousers, long sleeves and sturdy 

shoes when operating the tool

•  Take a secure stance when working (do not overreach, 

especially when using steps or a ladder)

• 

Hold the power tool by the insulated gripping 

surfaces only, because the cutting blades may 

contact hidden wiring or its own cord

 (cutting blades 

contacting a “live” wire may make exposed metal parts of 

the power tool “live” and could give the operator an 

electric shock)

• 

Keep all parts of the body away from the cutting 

blades, do not remove cut material or hold material 

to be cut when blades are moving, and make sure 

the switch is off when clearing jammed material

 (a 

moment of inattention while operating the tool may result 

in serious personal injury)

• 

Keep the (extension) cord away from the cutting 

area

 (during operation the cord may be hidden in shrubs 

and can be accidentally cut by the blades)

•  Always ensure that the ventilation openings are kept clear 

of debris

•  In case of electrical or mechanical malfunction, 

immediately switch off the tool or unplug charger from 

power source

AFTer Use

• 

Carry the tool by the handle with the cutting blades 

stopped and, when transporting or storing the tool, 

always mount the blade cover

 (proper handling of the 

tool will reduce possible personal injury from the cutting 

blades)