Skil 0750 - Инструкция по эксплуатации - Страница 7

7

Cordless shrub/grass shear 

0750

INTrodUCTIoN

•  This tool has been designed for trimming grass, shrubs 

and hedges, and is intended for domestic use only

•  This tool is not intended for professional use

•  Read this instruction manual carefully before use and 

save it for future reference 

3

•  Pay special attention to the safety instructions and 

warnings; failure to follow these may result in 

serious injury

•  Check whether the packaging contains all parts as 

illustrated in drawing 

2

•  When parts are missing or damaged, please contact your 

dealer

TeCHNICAl dATA 

1

Tool eleMeNTs 

2

A

  Battery

B

 Charger

C

  Safety switch

d

  Trigger switch

e

  Cover release button

F

  Protective cover

G

  Grass shear blade

H

  Shrub shear blade

J

  Ventilation slots

K

  Storage rail (

screws not supplied

)

l

  Blade guards (2)

M

  Storage hook

N

  Blade storage hook

sAFeTY

GeNerAl sAFeTY INsTrUCTIoNs

WARNING! Read all safety warnings and all 

instructions.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury. 

save 

all warnings and instructions for future reference.

 The 

term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless) 

power tool.

1) WorK AreA sAFeTY

a) 

Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

b) 

Do not operate power tools in explosive 

atmospheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks which 

may ignite the dust or fumes.

c) 

Keep children and bystanders away while operating 

a power tool.

 Distractions can cause you to lose control.

2) eleCTrICAl sAFeTY

a) 

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adapter 

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of 

electric shock.

b) 

Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

c) 

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of 

electric shock.

d) 

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. Keep 

cord away from heat, oil, sharp edges or moving 

parts.

 Damaged or entangled cords increase the risk of 

electric shock.

e) 

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of electric 

shock.

f) 

If operating a power tool in a damp location is 

unavoidable, use an earth leakage circuit breaker.

Use of an earth leakage circuit breaker reduces the risk 

of electric shock.

3) PERSONAL SAFETY

a) 

Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do not 

use a power tool while you are tired or under the 

influence of drugs, alcohol or medication.

 A moment 

of inattention while operating power tools may result in 

serious personal injury.

b) 

Use personal protective equipment. Always wear 

eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce 

personal injuries.

c) 

Prevent unintentional starting. Ensure the switch is 

in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool.

 Carrying power tools with your finger on the 

switch or energising power tools that have the switch on 

invites accidents.

d) 

Remove any adjusting key or wrench before turning 

the power tool on.

 A wrench or a key left attached to a 

rotating part of the power tool may result in personal 

injury.

e) 

Do not overreach. Keep proper footing and balance 

at all times.

 This enables better control of the power tool 

in unexpected situations.

f) 

Dress properly. Do not wear loose clothing or 

jewelry. Keep your hair, clothing and gloves away 

from moving parts.

 Loose clothes, jewelry or long hair 

can be caught in moving parts.

g) 

If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a) 

Do not force the power tool. Use the correct power 

tool for your application.

 The correct power tool will do 

the job better and safer at the rate for which it was 

designed.