Bosch MC812M865 - Инструкция по эксплуатации - Страница 21

 21

en

 Preparation

Settings

r

Instantaneous switching 
at maximum speed. Hold down 
switch for required duration.

0/off

Stop / Switch  off

min

–

max

Operating speed steplessly 
adjustable from low to high 
speed.

Pulse

Intermittent operation at maximum 
speed. Recommended for making 
e.g. milkshakes in the blender.

Cable storage compartment

X

Fig. 

C

The appliance is equipped with a cable 
storage compartment. The length of the 
power cord can be adjusted as required by 
pulling out or pushing it back. After finishing 
work, push the power cord into the cable 
storage compartment by jerking it back in.

Preparation

■ Place the base unit on a flat, clean and 

stable surface. 

■ Pull the power cord out to the required 

length.

W

Risk of injury!

–

Do not insert the mains plug until 
all preparations for working with the 
appliance are complete.

–

While operating the appliance, never 
reach into the bowl or filling shaft. 

–

After switching off, the drive continues 
running for a short time. Change 
tools / accessories only once the drive is 
at a standstill.

Important!

–

Do not switch the appliance on until 
tools or accessories have been 
completely attached.

–

The appliance cannot be switched on 
unless the bowl has been inserted 
correctly and closed with the lid. The lid 
lug must be fully inserted in the slot of 
the bowl handle.

–

Only use the rotary switch to switch the 
appliance on and off.

Use of tools

W

Risk of injury!

While operating the appliance, never reach 
into the bowl or filling shaft with your hands. 
Do not insert any objects (e.g. wooden 
spoon) into the bowl or filling shaft.

Universal blade

For cutting and chopping.

W

Risk of injury!

Do not touch the sharp edges of the uni-
versal blade with bare hands. When not 
in use, always store the universal blade in 
the blade guard. Take hold of the universal 
blade by the edge of the plastic handle only.

Kneading hook (plastic)

For kneading dough and mixing 
in ingredients which are not to be cut up 
(e.g. raisins, chocolate chips).

X

Fig. 

D

1. 

Attach the bowl. Observe the 
marking (

.

) when doing so. Rotate the 

bowl clockwise as far as possible.

2. 

Press drive shaft 1 into the tool holder 
until it locks into position.

3. 

Place the tool holder with the drive shaft 
on the drive. Place the universal blade 
or kneading hook on the tool holder and 
release.

Caution!

Do not add ingredients until tools have been 
fitted.

4. 

Add ingredients.

5. 

Attach the lid with the pusher. Observe 
the marking (

.

) when doing so. 

6. 

Rotate the lid clockwise as far as 
possible. 

7. 

Insert the mains plug. Set the rotary 
switch to the desired setting.

Adding more ingredients
8. 

To add more ingredients, set the rotary 
switch to 

P

. Remove the pusher 

and add ingredients through the filling 
opening. 

■ Add liquids through the pusher. 

The pusher insert can be used as a 
measuring jug.