Timberk AC TIM 07H S20 - Инструкция по эксплуатации - Страница 13

www.timberk.com • Electric air conditioner

13

QUIET button

Press this button to turn on or turn off the QUIET function in cool heat auto 

mode.

ECO button

In cool mode, press «ECO» button and the unit will operate under ECO 

mode.

ECO button

Press this button can turn off the light for indoor unit’s display. «     » icon on 

remote controller will disappear.Press this button again to turn on the light 

for indoor unit’s display. «    » icon on remote controller will be displayed.

Function introduction for combination buttons 

Child lock function

Press «    » and «    » simultaneously to turn on or turn off child lock function. 

When child lock function is on, «     » icon is displayed on remote controller. 

If you operate the remote controller, the «     » icon will blink three times 

without sending signal to the unit.

Temperature display switchover function

In the off mode, press «     » and «MODE» buttons simultaneously to switch 

temperature display between 

0

C and °F.

The minimum cooling temperature setting

IIn the off mode,pressing «TEMP» and «    » button at the same time,the 

LCD will display the minimum cooling temperature.The default temperature 

is 16

0

C and you can adjust the temperature with «    » or «    » from 16

0

C 

to 31

0

C . After pressing the «TEMP» and «    » button with 3 seconds it will 

return to the standby mode.

The maximum heating temperature setting

In the off mode,pressing «TEMP» and «     » button at the same time,the LCD 

will display the maximum heating temperature.The default temperature is 

31 

0

C and you can modulate the temperature with «    » or «    » from 16 

0

C 

to 31 

0

C . After pressing the «TEMP» and «    » button with 3 seconds it will 

return to the standby mode.

Timing defrost

In the heating mode, press «SLEEP» and «TURBO» buttons together for 3s 

would start or cancel the Timing defrost.

Low temperature heating function setting

In heating mode, pressing «Mode» and «   » button at the same time will 

enter/exit the low temperature heating function.
«LA» would be showed on the remote controller after entered into the low 

temperature heating funtion.
When switching from one mode to another mode, low temperature heating 

function was canceled. Turn off and then turn on air conditioner that will 

remain the low temperature heating function. After powered on, the low 

temperature heating mode was default to off status.
In the low temperature heating mode, «SLEEP» and «Low temperature heating» 

function cannot start at same time. When low temperature heating mode has 

already started,meanwhile you press the «sleep» button, the air conditioner will 

exit low temperature heating mode and enter the sleep mode. Vice versa.

NOTE:

Press «TURBO» or «FAN» button the unit will quit this 
function.
This function is no use in fan mode or dry mode.

NOTE:

Remote controller displays «ECO».
Air conditioner will operate at auto fan speed. Set 
temperature can’t be adjusted.
Under cool mode, sleep function can not work with 
ECO mode together at the same time.
Change mode will exit the ECO mode.