Hyundai Electronics H-AR7-09H-UI135 - Инструкция по эксплуатации - Страница 18

18.

Electric  air conditioner (split system)

EN

• 

For some models, the vertical louver can be adjusted by using the remote controller. 

Please refer to the REMOTE CONTROLLER OPERATION MANUAL for details.

NOTE: 

Best working conditions(the energy eiciency can be afected if not set 
under these conditions):

• 

The best angle of louvers is the default angle of cooling mode

• 

The best way of setting the angle of louvers at heating mode is: 

run the unit for 5 minutes and then use the remote controller to 
set the louvers at the default angle of cooling mode.

IMPORTANT! 

• 

Do not operate the air conditioner for long periods with the air 

low direction set downward in cooling or dehumidifying mode. 

Otherwise, condensation may occur on the surface of the horizon-
tal louver causing

• 

moisture to drop on to the loor or on furnishings.

• 

When the air conditioner is started immediately ater it was 

stopped, the horizontal louver might not move for approximately 
10 seconds.

• 

Open angle of the horizontal louver should not be set too small, as 
COOLING or HEATING performance may be impaired due to too 
restricted air low area.

• 

Do not move the horizontal louver manually, otherwise the hori-

zontal louver will be out of sync. Please cease operating, unplug 

power for a few seconds,then restart the air conditioner.

To set the horizontal air low direction (let - right)

• 

Move the vertical louver manually to adjust the air low in the direction you prefer.

IMPORTANT! 

Before adjusting the vertical louvers, the supply power must be discon

-

nected.