Hyundai Electronics H-AR7-09H-UI135 - Инструкция по эксплуатации - Страница 13

13.

Electric  air conditioner (split system)

EN

To set the Auto-on time

.

1. Press the TIMER ON button. The remote con

-

troller shows TIMER ON, the last Auto-on setting 

time and the signal “H” will be shown on the LCD 

display area. Now it is ready to reset the Auto-on 
time to START the operation.

2. Push the TIMER ON button again to set de

-

sired Auto-on time. Each time you press the but

-

ton, the time increases by half an hour between 

0 and 10 hours and by one hour between 10 and

24 hours.

3. Ater setting the TIMER ON ,there will be a one

second delay before the remote controller trans

-

mits the signal to the air conditioner. Then, ater 

approximately another 2 seconds, the signal 

“h” will disappear and the set temperature will 

re-appear on the LCD display window.

TIMER OPERATION

Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can 

set the auto-of time of the unit.

To set the Auto-of time.

Press the TIMER OFF button. The remote controller shows TIMER OFF, the last Auto-of setting 

time and the signal “H” will be shown on the LCD display area. Now it is ready to reset the Au

-

to-of time to stop the operation.

2. Push the TIMER OFF button again to set desired Auto-of time. Each time you press the button, 

the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 

hours.

3. Ater setting the TIMER OFF ,there will be a one second delay before the remote controller 

transmits the signal to the air conditioner. Then, ater approximately another 2 seconds, the 

signal “H “ will disappear and the set temperature will re-appear on the LCD display window.

NOTE: 

In the Dehumidifying mode, you can not switch the fan speed. It has 

already been automatically controlled.

Fig. 7

1

2

speed

temp

mode

memory

timer on

swing

direct

ion

sleep

timer off

clean

maxi

climate control