TP-LINK TL-SX3016F 16xSFP - Инструкция по эксплуатации - Страница 24

JetStream L2/L2+ Managed Switch

20

Configuration

Chapter 4  Configuration

4.1 

Configuration Overview

The switch supports two configuration options: 

■

Standalone Mode: Configure and manage the switch singly. 

■

Controller Mode: Configure and manage the network devices centrally. It is recommended in the 

large-scale network, which consists of mass devices such as access points, switches, and gateways.

Note: 

When the switch is changed from Standalone Mode to Controller Mode, configurations of the 

switch  will  be  lost.  For  details,  refer  to  the  related  documents  on  the  download  center  of  our 

official website: https://www.tp-link.com/support/download/.

4.2  Standalone Mode

In Standalone Mode, use a computer to configure and manage the switch using GUI (Graphical User 

Interface)  or CLI (command-line interface).

Figure 4-1 

Topology for Standalone Mode

Switch

PC

■

Using the GUI

1.  To access the management page of the switch, make sure the switch and computer are in the 

same subnet. Open a browser and type the switch’s IP address in the address field, then press the 

Enter key.

■

If the switch obtains IP address from the DHCP server (typically a router), find the switch’s IP address 

on the DHCP server.

■

If not, use the default IP address 192.168.0.1 to launch the switch’s management page.

2.  Ent

er 

admin

 for both the username and password in the lower case letters to log in. The first time 

you log in, change the password to better protect your network and devices.

3.  After a successful login, the main page will appear. You can click the menus on the top side and left 

side to configure the corresponding functions.

For the detailed configurations, refer to the User Guide and CLI Guide. The guides can be found on 

the download center of our official website: https://www.tp-link.com/support/download/.

■

Using the CLI

■

Set up a Telnet or SSH connection to access the switch via CLI.