Кофеварка Krups EA8010PE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Installation of the filter cartridge - total duration: around 2 min
To get the best taste from your coffee and extend your appliance’s service life, we advise you to use only the Claris - Aqua
Filter System cartridge sold as an accessory.
Fig. 30
: Mechanism to indicate the month the cartridge was fitted and when to replace it (after 2 months at most).
Installing the cartridge in the appliance. On first use, screw the filter cartridge into the bottom of the water tank
- Fig. 31
.
Place a 0.6 l container under the steam nozzle.
Press the
button for more than 3 seconds (unless the appliance requires a ‘
CLEAN’
and/or
‘CALC’
maintenance). The
indicator light
flashes.
When the installation of the filter cartridge is finished, the indicator light
becomes constant.
Your appliance is ready for the next use.
Settings
Connect the appliance to the mains power supply but do not turn it on.
Lift the cup grid by pressing on the back to make it tilt
- Fig. 25
.
Press
the and simultaneously
- Fig. 27
.
The digital display for parameter setting is under the servicing flap
- Fig. 28
.
Look down vertically to the bottom of the window
- Fig. 29
.
Proposed settings order:
1. Adjust water hardness
2. Adjust coffee temperature
3. Adjustment of the auto-off function
4. Info
1. Setting water hardness
Before using the appliance for the first time or if you have noted a change in water hardness, it is advisable to adapt the appliance
to the water hardness. Please contact your water supplier to find out the water hardness in your area.
The “water tank”
light will come on.
Press the
key
- Fig. 32
as many times as are needed to select the hardness level for the water used: 0 = very soft, 1 =
soft, 2 = moderately hard, 3 = hard, 4 = very hard.
To go to the next phase, press the
button or to leave the settings mode press
.
2. Setting the coffee temperature
The
‘CALC’
light comes on.
Press the
- Fig. 32
button as many times as are needed to adjust the desired coffee temperature: 1, 2 or 3.
To go to the next phase, press the
button or to leave the settings mode, press
.
3. Setting the automatic electrical power supply cut-off (auto-off)
The Claris cartridge needs to be replaced after about every 50 litres of water or every two months at least. If you are
using the Claris – Aqua Filter System cartridge, set the water hardness to level 0.
Appliances are pre-set in the factory for hardness level 4.
Degree of
hardness
0
Verv soft
1
soft
2
moderately hard
3
hard
4
extremely hard
° f
< 5,4°
> 7,2°
> 12,6°
> 25,2°
> 37,8°
°dH
< 3°
> 4°
> 7°
> 14°
> 21°
°e
< 3,75°
> 5°
> 8,75°
> 17,5°
> 26,25°
Settings
0
1
2
3
4
Appliances are pre-set in the factory to level 2.
Appliances are pre-set in the factory to 1 hour.
20
KR_EA80-81_1to84.qxp_Mise en page 1 04/05/2016 14:00 Page20
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
