Clatronic ES 2999 - Инструкция по эксплуатации - Страница 53

GB

53

• 

Make sure that the boiler lid and the fi lter holder are properly and securely 
closed while using the machine since this machine is pressurized when opera-
ting.

• 

Use only water to fi ll the boiler. Do not use any other liquid!

• 

If diffi culties are encountered when unscrewing the boiler lid, this may indicate 
that the machine is still pressurized. Let out the pressure with the procedure 
described above.

Overview of the Components

1 Boiler lid

7 Filter bowl

13 Glass pot

2 Boiler tank opening 

8 Filter holder

14 Lid

3 Control selector

9  Filter catch

15 Thermometer

4 „Ready“ lamp

10 Spoon

16 Vapor jet

5 Display

11 Tray

6 Brewing head

12 Drop grid

Illustration 1

A 

   Open  

–   Handle position for the insertion of the fi lter unit

B 

 Closed  

–   Handle position for the use of the fi lter unit

Symbols on the Switch

Off

Brew

Release Steam

Before using for the fi rst time

In order to remove all the dust that has deposited during the packing, wash the 
glass pot, the fi lter shell, the fi lter holder and the drip collection tray with warm 
soapy water. Do not use coarse or sharp cleansing agents. Wipe the base with a 
clean and humid towel.

Follow carefully the Safety Instructions!

It is highly recommended to carry out a complete brewing cycle as described in 
„Espresso Preparation“ without any coffee powder before making your fi rst cup of 
espresso or cappuccino. By doing so, any residual dust left inside the espresso 
machine will be removed. The preparation of an espresso or cappuccino is diffe-
rent from that required for a normal cup of coffee. Both espressos and cappuc-
cinos are made by pressing boiling water under pressure through fi nely ground 
coffee. Great attention is needed and it is highly recommended to read carefully all 
the instructions and safety indications provided herein, before brewing.

05-ES 2999 Skala   53

09.12.2005, 8:49:30 Uhr