BRAYER BR1102 - Инструкция по эксплуатации - Страница 9

16

17

EN

EN

•  Before assembling make sure that the cappuccinator lid 

and the container are dry. Install the cappuccinator lid 

(14) on the container (16) and install the cappuccinator 

on the coffee maker.

DESCALING

• 

Scale inside the boiler affects the taste of ready coffee, 

slows down the coffee making and reduces the service 

life of the coffee maker.

• 

Note that the thicker the scale, the more difficult it is to 

remove, that’s why we recommen regularly removing 

scale for effective operation of the coffee maker (see 

the table).

Water type

Cleaning frequency

Soft (filtered) water

Every 80 coffee making cycles

Hard (tap) water

 Every 40 coffee making cycles

•  You can use special descaling agents for espresso 

coffee makers or coffee machines to remove scale. 

You can also use table vinegar or citric acid solution (2 

teaspoons of citric acid per 1 liter of water).

•  Follow the instructions on the usage of the descaling 

agent, pour it into the water tank (10).

• 

Install one of the coffee filters (19 or 20) into the filter 

holder (18) matching the ledge on the filter (19 or 20) 

with the hole on the holder (18) and turn the filter (19 or 

20) counter/clockwise.

•  Place a cup of suitable height and capacity on the tray grid 

(2) (the cup capacity should be at least 325 ml).

•  Fill the container (16) with water, do not exceed the 

maximal level mark.

•  Install the cappuccinator lid (14) on the container (16) and 

install the cappuccinator back to its place until the lock 

clicking.

•  Direct the cappuccinator pipe (13) into the cup using the 

cappuccinator pipe angle adjustment bar (12).

•  Insert the power plug into the mains socket.

• 

Switch the coffee maker on by setting the power switch 

(11) «0/I» to the position «I», the indicator (6) will light up 

and start flashing. 

• 

When the coffee maker is ready for operation, the light 

indicator (6) will glow constantly.

•  To switch the cleaning mode on press and hold the 

«Latte»-button (8) for 3 seconds, the indicators «   » and 
«  » and the indicator (6) will be glowing.

• 

After the cleaning is finished, remove the tank (10), drain 

the remaining descaling solution and fill the tank (10) with 

clean water. Install the tank (10) back to its place.

•  Pour the descaling solution out from the cup, place the 

cup on the grid (2).

•  Once again press and hold the «Latte»-button (8) for 3 

seconds to wash the boiler.

• 

After you finish cleaning the coffee maker, switch the 

coffee maker off by setting the switch (11) «0/I» to the 

position «0».

• 

Wait until the coffee maker cools down, take the 

container (16), pull it towards yourself and remove it 

(pic. 1), remove the cappuccinator lid (14) from the 

container (16). 

•  Pour the remaining water out of the container (16), wipe 

the container with a dry cloth and dry the cappuccinator 

lid (14).

CLEANING THE COFFEE MAKER

• 

Unplug the coffee maker and wait until it cools down 

completely.

• 

Clean the coffee maker body with a soft, slightly damp 

cloth and then wipe it dry.

•  Do not use abrasive cleaners and solvents to clean the 

coffee maker body.

• 

You can wash the coffee filters (19 and 20) in a 

dishwashing machine. Clean the openings in the filters 

(19, 20) with a small brush.

• 

Do not immerse the coffee maker body, the power cord 

and the power plug into water or any other liquids.

•  Wash the water tank (10) and the milk container (16) 

with warm water and soft detergent, then dry them.

•  If mineral deposits have formed in the water tank (10), 

pour table vinegar into the tank (10) and rinse the tank 

(10) with water after dissolving the mineral deposits. 

•  Slightly lift the front part of the tray (1) and remove it, 

pour the water out of it, remove the grid (2) from the 

tray (1), wash the tray (1) and the grid (2) with water 

and neutral detergent, dry them and install back to their 

places.

STORAGE

• 

Before taking the coffee maker away for long storage, 

unplug it and let the unit cool down.

• 

Clean the coffee maker.

• 

You can place the filter holder (18) and the 

measuring spoon (21) on the coffee maker body for 

easy storing (pic. 14). 

• 

Pack the coffee maker in the original package.

• 

Use and store the coffee maker at the temperature 

above 0 °C.

• 

Keep the coffee maker in a dry cool place out of 

reach of children and disabled persons.

TROUBLES AND  TROUBLESHOOTING

Problem

Cause

Solution

The coffee 

maker can't be 

switched on

No voltage in the 

mains socket.
The power plug is not 

completely inserted 

into the socket

Make sure that the mains 

socket is operating by 

connecting a known good 

electric appliance to it.
Disconnect the power plug 

and connect it into the 

socket

Water leaks from 

the lower part of 

the unit

The water tray is full

Pour out water from the tray

Coffee leakage 

from the filter 

holder

Loose connection of 

the filter and boiler 

gasket, ground coffee 

got on the edges of 

the filter

Clean the edges of the filter