BRAYER BR1102 - Инструкция по эксплуатации - Страница 7

Кофеварка BRAYER BR1102 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 39
Загружаем инструкцию
background image

12

13

EN

EN

•  Place a cup of suitable height and capacity on the grid 

(2) (see the table «CHOOSING THE APPROPRIATE 

CUP»).

•  Direct the cappuccinator pipe (13) into the cup using 

the cappuccinator pipe angle adjustment bar (12).

•  Turn the frothed milk supply (intensity) control knob (15) 

to the right (in this position it produces more frothed 

milk). Turn the frothed milk supply (intensity) control 

knob (15) to the left (in this position it produces less 

frothed milk) (pic. 8, 9).

•  Insert the power plug into the mains socket.

• 

Switch the coffee maker on by setting the power switch 

(11) «0/I» to the position «I», the indicator (6) will light 

up and start flashing. 

• 

When the coffee maker is ready for operation, the light 

indicator (6) will glow constantly.

• 

To make one cup of cappuccino use a small filter (19) 

and press the «Cappuccino»-button (7) once; the light 

indicator «   » will light up.

• 

To make two cups of cappuccino use a big filter (20) 

and press the «Cappuccino»-button (7) twice; the light 

indicator «   » will light up.

Note:

 if you need to switch the coffee maker off 

during  the cappuccino making, press the button (7) 

«Cappuccino» again.
•  Remove the cup with the ready drink from the grid (2).

• 

After you finish using the coffee maker, switch the 

coffee maker off by setting the switch (11) «0/I» to the 

position «0».

• 

Wait until the coffee maker cools down, remove the filter 

holder (18) and wash the filter (19 or 20). 

•  If there is some milk left in the cappuccinator, remove 

the cappuccinator and put it in the fridge (pic. 10). If 

you used all the milk during the coffee making, it is 

recommended to remove and wash the cappuccinator 

(see the chapter «CAPPUCCINATOR CLEANING»).

SETTING THE FROTHED MILK AMOUNT

Setting the frothed milk amount for one cup of 

cappuccino:

- prepare the coffee maker for making cappuccino, as 

described above;

- press the «Cappuccino»-button (7) once. After the steam 

release starts, press and hold the «Cappuccino»-button (7) 

for the necessary amount of time;
- release the button (7) «Cappuccino», the coffee maker will 

switch to the coffee making mode;

- the next time you make cappuccino, the frothed milk 

amount will correspond to the preset operation time of the 

cappuccinator.

Return to the factory settings:

- when the coffee maker is switched off with the switch (11) 

«0/I», press and hold the «Cappuccino»-button (7) and 

then switch the coffee maker on by setting the switch (11) 

«0/I» to the position «I». The coffee maker will return to the 

factory settings.

Setting the frothed milk amount for two cups of 

cappuccino:

- prepare the coffee maker for making cappuccino, as 

described above;

- press the «Cappuccino»-button (7) twice. After the steam 

release starts, press and hold the «Cappuccino»-button 

(7) for the necessary amount of time;
- release the button (7) «Cappuccino», the coffee maker 

will switch to the coffee making mode;

- the next time you make cappuccino, the frothed milk 

amount will correspond to the preset operation time of the 

cappuccinator;

Return to the factory settings:

- when the coffee maker is switched off with the switch 

(11) «0/I», press and hold the «Cappuccino»-button (7) 

and then switch the coffee maker on by setting the switch 

(11) «0/I» to the position «I». The settings will be also 

reset for one cup and two cups of cappuccino.

MAKING LATTE

ATTENTION! When making latte be careful to avoid 

burns by outgoing hot steam.

•  Make sure that the removable tray (1) and the tray grid 

(2) are installed to their places.

•  Fill the tank (10) with cold water, do not exceed the 

maximal level mark, install the tank (10) back to its 

place.

•  Take the container (16), pull it towards yourself and 

remove it (pic. 1), remove the cappuccinator lid (14) from 

the container (16).

•  Fill the container (16) with milk, do not exceed the maximal 

level mark.

•  Install the cappuccinator lid (14) on the container (16) and 

install the cappuccinator back to its place until the lock 

clicking.

• 

Install one of the coffee filters (19 or 20) into the filter 

holder (18) matching the ledge on the filter (19 or 20) with 

the hole on the holder (18) and turn the filter (19 or 20) 

counter/clockwise.

• 

Add the required amount of ground coffee into the filter 

(19 or 20) with a measuring spoon (21) and slightly tamp 

the coffee in the filter (19 or 20) with the back side of the 

measuring spoon (21) (pic. 5, 6, 7).

• 

Install the filter holder (18) into the installation place « 

 » 

and turn the handle (4) to the right as far as it will go «   » 

(pic. 2, 3, 4).

•  Place a cup of suitable height and capacity on the grid (2) 

(see the table «CHOOSING THE APPROPRIATE CUP»).

•  Direct the cappuccinator pipe (13) into the cup using the 

cappuccinator pipe angle adjustment bar (12).

•  • Turn the frothed milk supply (intensity) control knob (15) 

to the right (in this position it produces more frothed milk). 

Turn the frothed milk supply (intensity) control knob (15) 

to the left (in this position it produces less frothed milk) 

(pic. 8, 9).

•  Insert the power plug into the mains socket.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

  1. Елена

    Здравствуйте! Очень люблю свою кофеварку , но стала подводить она меня. Вместо пенки бежит только молоко.Что делать?

    Ответить
Часто задаваемые вопросы
Как посмотреть инструкцию к BRAYER BR1102?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"