BRAYER BR1101 - Инструкция по эксплуатации - Страница 7

12

13

en

en

DRIP TRAY (1)

•  A red pop-up indicator (3) in the grid (2) will show 

when the tray (1) is full.

• 

Remove the grid (2) from the tray (1), remove the 

tray (1) and pour out water, install the tray back to its 

place, put the grid (2) on the tray (1).

• 

If necessary, wash the tray (1) and the grid (2) with 

water and soft detergent, rinse and dry.

STORAGE

•  Before taking the coffee maker away for long storage, 

unplug it and let the unit cool down.

•  Clean the coffee maker.

•  Pack the coffee maker in the original package.

•  Use and store the coffee maker at the temperature 

above 0 °C.

•  Keep the coffee maker in a dry cool place out of 

reach of children and disabled persons.

DELIVERY SET

1. 

Coffee maker — 1 pc.

2. 

Measuring spoon — 1 pc.

3. 

Manual — 1 pc.

The manufacturing date is specified in the serial 

number.
In case of any malfunctions promptly apply to the 

authorized service center. 

The manufacturer reserves the right to change the 

design, structure and specifications not affecting 

general principles of the unit operation, without prior 

notice.

The unit operating life is 3 years

TROUBLESHOOTING

Problem

Cause

Solution

Water leaks from 

the bottom of the 

coffee maker

The tray is full of 

water.

Please, clean the tray.

The coffee 

maker is 

damaged.

Please, apply to the service 

center for repairing the 

coffee maker.

Water leaks from 

the filter holder.

There is ground 

coffee on the 

filter.

Clean the filter edges from 

ground coffee.

Ready coffee 

has unpleasant 

taste.

The coffee 

maker was not 

washed after 

descaling.

Clean the coffee maker 

from mineral scale and 

wash it from the remaining 

descaling agent.

Ground coffee 

was stored in a 

humid place for 

a long time. 

Please, use fresh ground 

coffee. Keep unused 

ground coffee in a hermetic 

package in a dry cool place. 

The unit cannot 

be switched on

No voltage in the 

mains socket.

The power plug 

is not completely 

inserted into the 

socket.

Make sure that the mains 

socket is properly operating.
Check whether the power 

plug is completely inserted 

into the socket.

Steam doesn’t 

froth milk 

The ready 

indicator doesn’t 

glow white. 

You can use steam to froth 

milk only after the indicator 

starts glowing white.

The used cup 

does not suit 

for proper milk 

frothing.

Use a tall and narrow cup.

You used 

skimmed milk.

Use only whole milk with fat 

content 4-6%.

TECHNICAL SPECIFICATIONS

•  Power supply 220-240 V, ~ 50-60 Hz

•  Rated input power: 1200 W 

•  Water tank capacity: 1,5 l

RECYCLING

For environment protection apply to the 

specialized centers for further recycling after 

the service life expiration of the unit.
The waste generated during the disposal of 

the unit is subject to mandatory collection 

and consequent disposal in the prescribed manner.
For further information about recycling of this product 

apply to a local municipal administration, a disposal 

service or to the shop where you purchased this 

product.