Melitta Caffeo CI Touch - Инструкция по эксплуатации - Страница 7

24

Accessories

•  1 milk tube or 1 milk container including 

milk tube (depending on the model)

•  1 Coffee scoop with screw-in aid for the 

water filter

Before using for the first time

General information

•  Only use pure water without 

carbonation. 

•  Use the supplied test strip to determine 

the hardness of the water used and set 

the water hardness (Page 30).

Information for using for the first 

time

When using for the first time, the 

appliance may only be switched on 

without a Melitta

®

 Claris

®

 water filter.

Starting up the appliance

Switching on for the first time

Warning!

Danger of fire and electric shock 

due to incorrect supply voltage, 

incorrect or damaged connections 

and power cable.

–

Ensure that the supply voltage 

corresponds to the supply voltage 

specified on the identification label of 

the appliance. The identification label is 

located on the right side of the appliance 

behind the cover (Image 

B

, 

13

).

–

Make sure that the power socket meets 

the applicable standards for electrical 

safety. If in doubt, contact a qualified 

electrician.

–

Never use damaged power cables 

(damaged insulation, bare wires).

•  Place the appliance on a stable, dry and 

level surface with sufficient clearance (at 

least 10 cm) to the sides.

•  Plug the power cable into a suitable 

power socket.

•  Press the 

 button to switch on the 

appliance. 

After switching on, first set the language 

and then the time.
•  Turn the rotary switch (Fig. 

A

, 

10

) to 

select the respective setting (language, 

hour, minute).

•  Press the rotary switch to save each 

setting.

After making the settings, fill the bean 

container:
•  Filling the bean container (“Filling the 

bean container”, page 25).

Then fill the water reservoir:

•  Raise the lid of the water reservoir 

6

 and 

pull the water reservoir up and out of the 

appliance.

•  Fill the water reservoir with fresh tap 

water only up to the max. mark.

•  Insert the water reservoir into the 

appliance.

•  Press the rotary switch.
•  Place a vessel under outlet 

3

.

•  Press the rotary switch. First, an 

automatic rinsing is carried out. The 

appliance is ready for operation when 

the buttons illuminate.

BA_CI_082016.indd   24

21.09.2016   07:24:42