Кофемашина Melitta Caffeo CI Touch - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
32
Rinsing the coffee unit (Rinsing)
The appliance performs an automatic
rinsing of the coffee unit when it is
switched on and off. The coffee unit can
also be rinsed in between.
• Place a vessel under outlet
3
.
• Call up the
Care
sub-menu.
• Select
Rinsing
in the menu.
• Select
Start
in the menu. The rinsing
starts (hot water will flow out of the outlet
during the process).
Rinsing the milk unit (“Easy
Cleaning” programme)
After each preparation of a beverage with
milk, the appliance will prompt you to
rinse the milk unit
(Easy Cleaning?)
. The
Easy Cleaning programme can also be
performed in between.
• Place a vessel under outlet
3
.
• Call up the
Care
sub-menu.
• Select
Easy Cleaning
in the menu.
• Connect the tube to the outlet and to the
drip tray (Image
D
).
• Press the rotary switch
10
to confirm.
The "Easy Cleaning" programme starts
(hot water and hot steam run through
the outlet and the tube during the
process).
Cleaning the milk unit ("Intensive
Cleaning" programme)
With the “Intensive Cleaning” programme,
the milk unit is cleaned thoroughly with a
cleaning agent.
To ensure optimum protection of your
appliance and the best hygiene standards,
it is recommended to perform the
“Intensive Cleaning” programme once a
week.
Only use Melitta
®
milk system cleaning
agent.
• Clean the milk tube and the milk outlet
opening.
• Place a vessel (0.5 l capacity) under the
outlet
3
.
• Call up the
Care
sub-menu.
• Select
Intensive Cleaning
in the menu.
• Fill the milk container with 50 ml of
Melitta
®
milk system cleaning agent.
• Then add 450 ml of warm tap water to
the milk container.
• Connect the tube to the milk container
and to the outlet (Image
C
).
• Press the rotary switch
10
to confirm.
The "Intensive Cleaning" programme
starts (hot steam and hot cleaning
liquid runs out of the outlet during the
process).
• Subsequently, the programme interrupts
automatically and prompts for rinsing of
the milk container.
• Rinse out the milk container thoroughly.
• Fill the milk container with 0.5 l of tap
water.
• Connect the tube to the milk container
and to the outlet (Image
C
).
• Press the rotary switch
10
to confirm.
• Empty the vessel (0.5 l capacity) and
place it under the outlet
3
again.
• Press the rotary switch
10
to confirm.
The “Intensive Cleaning” programme will
continue (hot water runs out of the outlet
during the process). The appliance is
then ready for operation.
BA_CI_082016.indd 32
21.09.2016 07:24:43
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
